Keeway

KEEWAY

FILTER BY SCOOTER

adly / her chee
aeon
agm
aprilia
atala
atu explorer
baja
baotian
beeline
benelli
benero
benzhou
beta
buffalo
cpi
daelim
dazon
derbi
dinli
eppella
ering
explorer
flex tech
fly scooters
forstinger
generic
gilera
gt union
herkules
honda
italjet
iva
jackfox
keeway
kreidler
ktm
longjia
malaguti
mawi
mbk
meteorit (atu)
motofino
motomojo
motorro
motowell
motoworx
muz / mz
pegasus
peugeot
pgo
piaggio
nova motors
powersports factory
pulse
qianjiang
rex (jinan qingqi
rex (jinan qingqi
shenke)
ride
rs ultima
sachs
sacom
saro
seiran
simson
sym (sanyang)
suzuki
tank
tauris
tec runner
tgb
tng
vento
vespa modern
yamaha
yamati

FILTER BY BRAND

FILTER BY TYPE

View:

Sort By:

Show:

flywheel puller 27x1mm left-hand outer thread for Minarelli

$11.48

flywheel puller 27x1mm left-hand outer thread for Minarelli

$11.48

Rotor puller for removing the alternator flywheel. Our list is based on experience, but you are best to measure threads prior to ordering. Attention: Suitable for Minarelli engines with Yamaha ignition. On Minarelli engines with Ducati-ignition, please order 17435! Also suitable for: CPI, Keeway and Chinese 2-stroke Minarelli-based engines. According...

kickstart lever Light aluminum for Minarelli, Kymco, CPI, Peugeot, GY6

$30.24

kickstart lever Light aluminum for Minarelli, Kymco, CPI, Peugeot, GY6

$30.24

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

kickstart gear for Minarelli, CPI

$10.87

kickstart gear for Minarelli, CPI

$10.87

Kickstarter wheel [carrier] for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

exhaust gasket - flat - strengthened version

$2.40

exhaust gasket - flat - strengthened version

$2.40

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a sheet metal inner ring between the gasket material ensures optimal heat resistance and no blow through. Thickness: 3.5mm Suitable for almost all 50cc scooters.

variator locking tool / clutch holder for Honda, Kymco, Keeway

$14.52

variator locking tool / clutch holder for Honda, Kymco, Keeway

$14.52

battery Fulbat gel cell FTX4L / FTZ5S SLA

$23.59

battery Fulbat gel cell FTX4L / FTZ5S SLA

$23.59

battery Fulbat FTX4L-BS MF maintenance free

$18.03

battery Fulbat FTX4L-BS MF maintenance free

$18.03

clutch springs Malossi Fly / MHR Delta Clutch yellow 1.8mm Racing for Kymco, Peugeot, Piaggio

$8.45

clutch springs Malossi Fly / MHR Delta Clutch yellow 1.8mm Racing for Kymco, Peugeot, Piaggio

$8.45

cylinder cover / forced-air cooling for Minarelli AC horizontal

$6.64

cylinder cover / forced-air cooling for Minarelli AC horizontal

$6.64

cylinder gasket set Malossi sport 70cc for Minarelli horiz. AC (original cylinder head)

$5.43

cylinder gasket set Malossi sport 70cc for Minarelli horiz. AC (original cylinder head)

$5.43

variator / crankcase cover gasket for Minarelli horiz. short version

$2.06

variator / crankcase cover gasket for Minarelli horiz. short version

$2.06

piston pin circlips Naraku 12mm

$1.20

piston pin circlips Naraku 12mm

$1.20

12mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend opening the circlip against the travel of the piston. G-clip design. Delivery contains 2x circlips.

cylinder head gasket for Minarelli horizontal, CPI, Keeway AC

$1.20

cylinder head gasket for Minarelli horizontal, CPI, Keeway AC

$1.20

Cylinder head gasket for horizontal air-cooled Minarelli and 1E40QMB engines.

shock extension Naraku 40mm blue

$15.12

shock extension Naraku 40mm blue

$15.12

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the back end and looks just plain fast. A must for the stylista. When mounting, the shock must be rotated through 90 degrees. This is very simply done...

torque spring mounting tool for rear pulley up to 125mm

$33.31

torque spring mounting tool for rear pulley up to 125mm

$33.31

Counterpressure spring mounting tool for convertor units up to 125mm outer diameter.

Sold Out cylinder gasket set Malossi sport 50-70cc for Minarelli horiz. AC

$6.03

Sold Out

cylinder gasket set Malossi sport 50-70cc for Minarelli horiz. AC

$6.03

Cylinder gasket set for all 50 and 70cc sports cylinder kits from Malossi for horizontal Minarelli AC engines.

VIEW PRODUCT

variator holder / blocking tool for CPI, Keeway, 1E40QMB

$12.10

variator holder / blocking tool for CPI, Keeway, 1E40QMB

$12.10

This is a specially made Variator locking tool for blocking the variator during assembly and dismantling. Easy handling makes work fast and professional. The tool is simply placed over the teeth of the Kickstarter carrier and fixed into the two long holes with a screw or bolt on the engine...

kick starter ratchet for CPI, Keeway

$3.61

kick starter ratchet for CPI, Keeway

$3.61

The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of the crankcase and its teeth can become worn, causing kickstarter issues. Suitable for CPI/ Keeway engines.

reed valve assy for Minarelli horizontal, CPI

$12.10

reed valve assy for Minarelli horizontal, CPI

$12.10

Replacement reed block with steel petals. Suitable for all horizontal Minarelli engines, CPI, Keeway, Generic, Mawi, Longija, Morini engines, Aprilia with Minarelli and Aprilia engines, Suzuki Katana and Zillion and many other Minarelli-based engines.

torque springs Naraku Sport V.2 - set of 2 pcs

$15.12

torque springs Naraku Sport V.2 - set of 2 pcs

$15.12

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually. Replacing the spring...

twist control Naraku racing 105mm w/o torque spring for Minarelli, CPI, Keeway, Morini

$22.38

twist control Naraku racing 105mm w/o torque spring for Minarelli, CPI, Keeway, Morini

$22.38

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the torque driver and even out the loss of power from the lack of friction. The result is smooth converter function that makes a significant difference on untuned engines. The vehicle accelerates better and the height...

crankshaft bearings Naraku heavy duty left and right incl. oil seals for Minarelli CW, MA, MY, CA, CY

$20.56

crankshaft bearings Naraku heavy duty left and right incl. oil seals for Minarelli CW, MA, MY, CA, CY

$20.56

Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right in metal cage crank bearings and relevant shaft seals. Only bearings with C3 bearing clearance from NTN or KOYO used. Please note! When changing the crank, always use new bearings and seals.

exhaust gasket - flat - strengthened version

$2.40

exhaust gasket - flat - strengthened version

$2.40

intake manifold 21mm unrestricted for Minarelli horizontal, CPI, Keeway, 1E40QMB

$9.66

intake manifold 21mm unrestricted for Minarelli horizontal, CPI, Keeway, 1E40QMB

$9.66

Very low-cost intake manifold for derestricting the inlet port. This increases the size of the opening to 21mm. This is a must when using a larger carburettor. Even when used with the original carb, acceleration is increased. A sensible purchase if your manifold shows signs of wear or becomes porous....

exhaust gasket 25x33x4mm

$1.20

exhaust gasket 25x33x4mm

$1.20

Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. 25x33x4mm.