Motoworx

Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right in metal cage crank bearings and relevant shaft seals. Only bearings wit...

Metal fuel tank for Chinese-built scooters up to the end of 2006, black. From 2007 on plastic tanks were fitted. Please check the material of your ...

Reinforced Malossi MHR torque spring for Minarelli engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Solid luggage rack for all scooters with less robust factory-fitted items, allows for a good quality top box to be fitted. Black, fixings bolts not...

Complete 19mm aftermarket carburettor (membrane type) with E-choke and jetting. Ready to mount; suitable for 50 and 80cc 4-stroke engines. This is ...

This Variator sleeve replaces the original factory fitted sleeve and collar. This lifts the restricted power. The scooter will be capable of approx...

Exhaust manifold gasket for scooters and mopeds with original and tuning/sports exhaust systems with round metal gaskets and dimensions of approx. ...

Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm &...

The rectifier/controller changes the voltage from the alternator into the DC for the on board computer, 12V, and keeps the voltage within a certain...

Universal throttle sleeve with rubber grip for 125/150cc 4-stroke scooters with GY6 chassis and 22mm diameter handlebars. outer length: 122mm inner...

Taillight cover / faring in silver. This faring fits directly underneath the rear light unit.

Under seat front cover fairing in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Outer part front leg shield in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Speedo display surround fairing in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Rotor puller for removing the alternator flywheel. Our list is based on experience, but you are best to measure threads prior to ordering. Attentio...

The NARAKU crossover combines Racing design with an internal structure that is tailored to the requirements of 4-stroke engines. Road legal thanks ...

Valve cover gasket [rubber] - GY6 50ccm

M12x1.25mm nut for rotor and pulley on the crankshaft. Suitable for all special cranks with M12 thread for Piaggio and Minarelli engines. E.g.: Sta...

Original brake lever for rear brake discs (left-hand brake lever). Suitable for all rear disc brake lever fittings. For added assurance, please che...

The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of the crankcase and its teeth can become worn, causing ...

Throttle cable to fit most 4-stroke Chinese-built scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many o...