Vespa Modern

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Vacuum-operated fuel tap for various scooters with Piaggio engines. Fitment diameter in tank: 15mm

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the converter and even out the loss of power from t...

Replacement rear right indicators for Piaggio Vespa ET2 and ET4 scooters. The turn signal corresponds in shape and dimension to the original part. ...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Low-cost seal set for membrane blocks for Piaggio 50cc 2-stroke engines. Please note: generally an upper and lower seal is required.

M12x1.25mm nut for rotor and pulley on the crankshaft. Suitable for all special cranks with M12 thread for Piaggio and Minarelli engines. E.g.: Sta...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Replacement rear left indicators Piaggio Vespa ET2 and ET4 scooters. The turn signal corresponds in shape and dimension to the original part. Repla...

Replacement side stand for Vespa ET2 and ET4 scooters - black.

Replacement front right indicator for Piaggio Vespa ET2 and ET4 scooters. The turn signal corresponds to the original part. Replaces OEM-No.: 293601.

Replacement front left indicators for Piaggio Vespa ET2 and ET4 scooters. The turn signal corresponds to the original part. Replaces OEM-No.: 293600.

Very high-quality 3 in 1 tool for blocking and removing the variator and clutch bell, including integrated hex wrench to loosen the clutch retainer...

Cylinder studs including special nuts with M6 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Replacement right-hand mirror in original design with E-certification for Vespa ET2, ET4 scooters from 2000 on. Cheaper alternative to expensive or...

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...