49X QuattronoveX 50

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

Complete alternator for Minarelli-based 2-stroke engines. Suitable for Keeway, CPI, Generic, Longjia, Mawi etc. There are currently 4 different ver...

Bolt and nut set for Chinese-built 2-stroke scooters, Keeway etc. with almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering ind...

Vacuum-operated fuel tap for various Kymco and SYM scooters. Securing nut thread: M16x1.5mm Only for scooters with metal fuel tanks!!! OEM-quality.

Exhaust heat guard. Often becomes damaged in a spill and changing it will refresh the look of your machine. Delivery is for 1 head guard in black.

Wheel-mounted speedo drive for speedo cables with two spokes, retainer nut and square drive. The speedo cable is suitable for Chinese-built 4-strok...

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on 70cc Naraku 2-stroke cy...

Piston ring set for 70cc Naraku cylinder kit for 1E40QMB engines with 12mm gudgeon pin.

Very high quality Malossi crank for 12mm gudgeon pins. Typical Malossi high quality. Full cheek design for higher pre-compression, for max fill and...

Malossi 50cc sports cylinder for all CPI/ Keeway and Generic models (from 2003 on). Malossi sport 50 cast iron cylinder with altered timing and lar...

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Minarelli 1E40QMB engines. Delivery as shown, including: piston rin...

High Tech convertor plate in extremely resistant nitride steel from Malossi. Features straight guide grooves for better acceleration. 2x different ...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 45mm for Minarelli/CPI/Morini scooters. The kit includes a eve slider plastic pla...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 45mm for Minarelli/CPI/Morini scooters. The kit includes a eve slider plastic pla...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

These Naraku cylinder gasket sets contain all the necessary gaskets from the base gasket upwards and can be optionally used on the Naraku 2-stroke ...

The Naraku Traffic system combines contemporary fresh lines with a pleasant engine note. This system integrates very well with new modern vehicles....

MTKT Racing under tray with lasered MTKT logo on the bracket. A rare piece from a small one-man tuning operation. No mass-produced parts, just limi...

Dellorto 17.5 mm carburettor. For scooters with Minarelli or CPI engines. Recommended even for untuned engines, as the carburettor is easier to tun...

Replacement variator for 50cc 2-stroke CPI, Keeway, Generic engines and Chinese-built Minarelli-based 50cc 2-stroke engines. The weight tracks corr...

Naraku Racing Variator, V.2 for all 50cc 2-stroke CPI, Keeway, Generic engines with a 16mm tail shaft. The weight surfaces are moved very far to th...