Adly / Her Chee

Forged 63mm Naraku piston for 180cc cylinder kits for GY6 and air-cooled Kymco scooters. The manufacturing of this forged piston means it is more d...

160cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 58.5 mm. The kit is compatible with all air-cooled 4-stroke 125-150cc Kymco engin...

180cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 63 mm, meaning the cases must be worked to accept the cylinder. This requires pre...

Seemingly the most robust clutch on the market in top quality with adjustable pre-tension. We offer a clutch spring set with various spring weights...

Replacement clutch bell from Malossi. Shaky drive from standstill could indicate an issue with the clutch bell. This will lead to damage in the clu...

The finest clutch bell you could use, with cooling vents for improved heat dispersion and reduced slip on the bell and plates.

Counter pressure spring by Polini for GY6 125/150cc, Kymco, Honda maxi scooters providing a 15% increase in pressure from the oriental spring and i...

The EVO clutch bell for various GY6, Kymco and Honda maxi scooters. Very lightweight and easy-spinning and CNC-machined from one solid block, unlik...

Naraku quality shaft seals for scooters with 125/150cc GY6 engines. Shaft seals are required on the rear of the convertor and seal in the convertor...

Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the...

Engine mount for 125-150cc GY6 engines. Please compare with product image.

Excellent value for money, quality scooter tyre. This midrange priced Quick Q007 tubeless tyre has a great parabolic profile design that offers goo...

3 Set of sliders for the Naraku Maxi Speed variator for scooters with 125cc GY6 and Kymco AC engines.

Universal handlebar grip for scooters, motorcycles and quads/ATVs with 22mm diameter handlebars. outer length: 120mm inner length: 115mm

Rotor/magnet wheel for alternators. Alternators are currently available with 6 or 8 coils. Please check your original item to check which one you r...

The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged...

15mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Variator back plate for GY6 125/150cc 4-stroke Chinese-built engines. This component corresponds to 100% of the original. Only for 15 mm tail shaft!

Counterpressure spring mounting tool for convertor units 125-155mm outer diameter.

Malossi Racing clutch spring set. Springs suitable for various Maxi scooters with original 3 shoe clutches from 125-200cc. Set comprises 3 differen...

Fan Wheel for air cooling. This item sits on the alternator rotor and is attached with 4 screws.

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 835x20x30

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 743-18-20

Complete piston kit including rings, gudgeon pin and gudgeon pin circlips for original or Naraku aftermarket cylinders. Of course, the cylinder has...

Complete cylinder kit with all gaskets and parts for fitting. This 125cc Naraku cylinder delivers engine performance corresponding to the original....

This cylinder gasket set comprises all the necessary gaskets from the base gaskets up. Can be used on Naraku 4-stoke cylinders (NK600.10), but is a...

Dowel pin set for 125/150cc GY6 engines. Delivery contains: 6x dowel pins for M8 and 8x dowel pins for M6.

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Current Naraku counterpressure springs with different alloying of the spring steel. A necessary addition where engines have been tuned. RPM increas...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Great value...

High-Tech straight from the lab NGK has taken a massive step forward in spark plug technology with the new Iridium IX. Laboratory testing has shown...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Well priced clutch spare set in OEM-quality incl. 3 shoe replacement clutch and clutch bell.

Centre stand for 125/150cc Chinese-built 4-stroke scooters. There are differences between the location of the spring in individual centre stands, s...

Naraku cylinder gasket set (61mm/170cc) 4-stroke