Adly / Her Chee

The Heidenau K61 Reinforced is a sports-oriented scooter tyre with very good handling and top direction changing. Great mileage and good wet weathe...

The Heidenau K59 Reinforced is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arrang...

For technology-inspired tuning freaks we offer this reinforced GY6 Racing crank with a 2mm longer stroke. This is a no-frills product. 4-stroke pro...

Complete cylinder kit with all gaskets and small parts for fitting. This 150cc Naraku cylinder yields engine performance corresponding to the origi...

The Heidenau K62 Snowtex winter tyre for scooters guarantees great handling on cold, wet surfaces. Thanks to the high-quality materials used in thi...

Shaft oil seal Internal diameter: 20mm, External diameter: 42mm, Thickness/Depth: 8/9mm

Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of th...

24mm connector boot for Arreche carbs with clamping flange.

23mm connector boot for Arreche carbs with clamping flange.

Reinforced starter motor freewheel without starter sprocket, from Naraku. The starter mechanism is subjected to higher loading where engines have h...

Polini reinforced transmission cover, ideal for tuning above 70cc. The standard cover allows the gearshaft to sit in a recess and is only lubricate...

Replacement oil pump drive gear for scooters with Minarelli-based 2-stroke Chinese-built engines and Minarelli 50cc 2-stroke AC/LC engines.

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Cylinder head gasket for horizontal air-cooled Minarelli and 1E40QMB engines.

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Well priced racing clutch with lighter clutch shoes. Weight saving means engagement at higher revs. Harder clutch springs. A lower quality sports c...

Replacement taillight glass for various scooters and motorcycles from Cagiva, Italjet, Rieju, Voxan, MBK and Yamaha. The glass is consistent with t...

Replacement clutch bell for lightly-tuned engines. Matches the dimensions of the original (107mm). Cheapest clutch we offer, but definitely worth t...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Transparent coolant hose with 15mm internal diameter, 1m in length. 15mm coolant hoses are often used on scooters and mopeds with Minarelli engines...

3 Set of sliders for the Naraku HS and HS-Racing variators for scooters with Minarelli and CPI engines.

Aluminium kickstarter Light suitable for Minarelli and Peugeot engines. Titanium colour.

Easy to tune variator from Top Racing. The variator can be used with original belt. Supplied with unrestricted vario sleeve and 3 sets high quality...

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Self-locking nut M14x1.50mm for rear wheel shaft (central nut for rear wheel). Also for other Minarelli engines and other models with M14x1.50mm th...

Complete engine gasket set for horizontal Minarelli AC and LC engines. This gasket set contains all the relevant engine gaskets for air- and water-...

Complete starter clutch. The counter piece of the electrical starter is responsible for uncoupling the starter once the engine is running. If this ...

Complete shaft seals for Minarelli engines. Contains 6 seals incl. 2x shaft seals for the rear convertor.

Gearbox output shaft incl. sprocket for 50cc Chinese-built 2-stroke, CPI and Keeway scooters. 44 tooth as per original. shaft and sprocket are read...

Cylinder gasket set for 50cc air-cooled Minarelli engines. Suitable for original and aftermarket 50cc cylinders.

Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all hor...

Low-cost seal for membrane blocks on upright 50cc 2-stroke Minarelli engines. Please note: generally an upper and lower seal is required.

High Quality Racing full circle crankshaft from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshaf...

Counterpressure spring mounting tool for convertor units up to 125mm outer diameter.

High Quality Racing full circle crankshaft from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshaf...

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.31). Delivered as shown with piston rings, gudgeon pin and circ...

Cylinder gasket set for all 50 and 70cc sports cylinder kits from Malossi for horizontal Minarelli AC engines.

Replacement motor bearings for scooters with 50-150cc GY6 engines and Kymco scooters with 2- and 4-stroke engines. Dimensions (Internal x External ...

Overrange kit for high-end engines. Diameter of rear convertor and variator plate are larger than the standard items. Together with the included dr...

Standard Bosch spark plug. This spark plug matches the heat value and construction of the original.

Naraku complete alternator stator for horizontal Minarelli engines. Attention! Not for Minarelli engines with Ducati ignitions.

Starter relay for various MBK, Piaggio and Yamaha 2- and 4-stroke Scooters. Can instead of OEM No:.. 1nt be 02501500 / 1nt-h1940-00 / 29u-81950-93 ...

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...