Aeon

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

NARAKU Racing intake manifold for GY6 and all GY6-based models, as well as Honda Monkey and Monkey replica engines. The intake manifold has a passa...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Naraku Racing Intake V.2 including 2 adapters for all common carburettors. The 23mm adapter is suitable for all Dellorto 10-21mm and Arreche 17-21m...

Forged 63mm Naraku piston for 180cc cylinder kits for GY6 and air-cooled Kymco scooters. The manufacturing of this forged piston means it is more d...

160cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 58.5 mm. The kit is compatible with all air-cooled 4-stroke 125-150cc Kymco engin...

180cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 63 mm, meaning the cases must be worked to accept the cylinder. This requires pre...

Naraku heavy-cheeked HPC racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and t...

EGreat quality Naraku crank for scooters with horizontal Minarelli engines. Corresponds to the original crankshaft dimensions. Delivery includes s...

Naraku heavy-cheeked racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and the p...

Crank shaft seal set from Naraku for 50cc Minarelli engines. Kit contains all the important crank seals for servicing mopeds with Minarelli engines...

Naraku quality shaft seals for scooters with 125/150cc GY6 engines. Shaft seals are required on the rear of the convertor and seal in the convertor...

Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the...

Well priced, good quality 17.5mm carb from Naraku for Minarelli and CPI engines and is a must have for an tuned engine and in particular 70cc engin...

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

NARAKU sports variator for Minarelli engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction of th...

3 Set of sliders for the Naraku Maxi Speed variator for scooters with 125cc GY6 and Kymco AC engines.

CNC-machined pulley with 100% smoothness and optimal running surface for the belt. This is equal in quality and performance to the pulleys from Ita...

15mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 835x20x30