Aeon

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Wh...

Reinforced clutch bell blocking tool. The pins grasp the bell and the nut can easily be removed. Attention! Minarelli engines have different sized ...

Yasuni replacement silencers silver in aluminium. Suitable for Yasuni Z exhaust systems. The silencers comes with gasket and nuts it also works on ...

Yasuni replacement silencers in carbon / aramid construction specifically for Yasuni Carrera 30 Exhaust. The silencers comes with gasket and nuts.

Yasuni replacement silencers in Carbon design specifically for Yasuni Carrera 30 Exhaust. The silencers comes with gasket and nuts.

Yasuni replacement silencers in Carbon design suitable for Yasuni Z exhaust systems. The silencers comes with gasket and nuts. it also works on sys...

Yasuni replacement silencers in carbon / aramid construction suitable for Yasuni Z exhaust systems. The silencers comes with gasket and nuts. it al...

gasket for the silencers at all Yasuni Scooter exhaust systems and geared moped exhaust systems. Suitable respect, not for Yasuni Carrera 30th

Naraku Racing Intake V.2 including 2 adapters for all common carburettors. The 23mm adapter is suitable for all Dellorto 10-21mm and Arreche 17-21m...

Yasuni replacement silencers fits in black anodized aluminium construction for Yasuni R, R/07, Carrera 16, Carrera 16/07, Carrera 20 and Carrera 21...

Yasuni replacement silencers in Carbon design fits Yasuni R, R/07, Carrera 16, Carrera 16/07, Carrera 20 and Carrera 21 Exhaust. The silencer comes...

Yasuni replacement silencers fits in silver aluminium construction for Yasuni R, R/07, Carrera 16, Carrera 16/07, Carrera 20 and Carrera 21 Exhaust...

Malossi replacement piston 47mm diameter with rings, gudgeon pin and circlips for the 70cc MHR Replica kit for scooters with upright Piaggio and Pe...

High rev bearing set from Malossi suitable up to high-end tuned Minarelli engines. Half-open polyamide cage prevents overheating. Dimensions: 20x47...

High rev bearing set from Malossi suitable up to high-end tuned Minarelli engines. Half-open polyamide cage prevents overheating. Dimensions: 20x47...

Good quality replacement drive belt for Kymco Heroism maxi-scooters with 125 and 150cc capacity. Dimensions: 759*19.5 Also suitable for: : ADLY 125...

Replacement bolts for the internal rotor ignition systems from Malossi for scooters with Piaggio AC or Minarelli engines.

Carbone Lorraine V-Brakes sintered pads for scooters, motorcycles, mopeds and quads. Outstanding braking performance even in the wet, less slip and...

High-quality Bando drive belt from a world-leading manufacturer for scooters, quads or ATVs. Suitable for various 125, 150 and 180cc Kymco, Daelim ...

6204 C3 bearing. Internal diameter 20mm, external diameter 47mm, thickness 14mm.

Forged 63mm Naraku piston for 180cc cylinder kits for GY6 and air-cooled Kymco scooters. The manufacturing of this forged piston means it is more d...

160cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 58.5 mm. The kit is compatible with all air-cooled 4-stroke 125-150cc Kymco engin...

180cc Big Bore Kit for GY6 based 125/150cc + engines. The bore is 63 mm, meaning the cases must be worked to accept the cylinder. This requires pre...

Naraku heavy-cheeked HPC racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and t...

EGreat quality Naraku crank for scooters with horizontal Minarelli engines. Corresponds to the original crankshaft dimensions. Delivery includes s...

Naraku heavy-cheeked racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and the p...

Crank shaft seal set from Naraku for 50cc Minarelli engines. Kit contains all the important crank seals for servicing mopeds with Minarelli engines...

Shaft oil seal Internal diameter: 20mm External diameter: 30/33.5mm Thickness/Depth: 6mm

Woodruff key with blunted edges for scooters with 50-180cc Piaggio 2-stroke engines. length=12mm, wide=3mm, high=5mm

Seemingly the most robust clutch on the market in top quality with adjustable pre-tension. We offer a clutch spring set with various spring weights...

Replacement clutch bell from Malossi. Shaky drive from standstill could indicate an issue with the clutch bell. This will lead to damage in the clu...

The finest clutch bell you could use, with cooling vents for improved heat dispersion and reduced slip on the bell and plates.

Counter pressure spring by Polini for GY6 125/150cc, Kymco, Honda maxi scooters providing a 15% increase in pressure from the oriental spring and i...

The EVO clutch bell for various GY6, Kymco and Honda maxi scooters. Very lightweight and easy-spinning and CNC-machined from one solid block, unlik...

Naraku quality shaft seals for scooters with 125/150cc GY6 engines. Shaft seals are required on the rear of the convertor and seal in the convertor...

Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the...

Arreche 23.5mm sealing ring for carbs with threaded flange.

Arreche 25mm sealing ring for carbs with threaded flange.

24mm intake manifold for maximum flow and performance. Ideally, you match the manifold to the size of the carb.

Competition 24mm carburettor kit from Arreche with manual choke for horizontal Minarelli engines, suitbale for 70cc high end racing engines. This s...

Cylinder base gasket for horizontal Minarelli and 1E40QMB engines. For air and water-cooled engines.

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Well priced, good quality 17.5mm carb from Naraku for Minarelli and CPI engines and is a must have for an tuned engine and in particular 70cc engin...

Simple, adaptable and genius intake manifold. The 2 adapter plates, 24mm and 32mm allow for different sizes of carb. The rubbers can be rotated in ...

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

NARAKU sports variator for Minarelli engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction of th...