AirTec 125

Snap ring for Turbo Kit silencer with removable db killer.

3 Set of sliders for the Naraku Maxi Speed variator for scooters with 125cc GY6 and Kymco AC engines.

Universal throttle sleeve with rubber grip for 125/150cc 4-stroke scooters with GY6 chassis and 22mm diameter handlebars. outer length: 122mm inner...

Replacement motor bearings for scooters with 50-150cc GY6 engines and Kymco scooters with 2- and 4-stroke engines. Dimensions (Internal x External ...

Standard Chinese-built-made spark plug as originally factory-fitted. Matches NGK CR7HSA.

Crankcase cover gasket for Chinese-built scooters with GY6 125/150cc engines. The gasket is solely for the short engine blocks of the 4-stroke mode...

Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.

Brake light switch for front brake discs. Suitable for GY6 50/125/150cc Chinese-built scooters.

Variator back plate for GY6 125/150cc 4-stroke Chinese-built engines. This component corresponds to 100% of the original. Only for 15 mm tail shaft!

Cylinder head gasket - GY6 125cc

Mid-crankcase gasket for GY6 125/150cc engines.

Gasket for the gearbox cover on GY6 125/150cc 4-stroke engines.

Right-hand crankcase gasket - GY6 125/150cc

Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.

Oil dip stick for GY6 50ccm, 125cc and 150cc engines. Includes O-ring.

Centre stand spring (galvanized steel). Length: 85mm Width: 15mm Wire Size: 3mm

Side stand spring (galvanized steel) Length: 90mm Width: 15mm Wire Size: 2,5mm

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Rubber centre stand stop for 125/150cc Chinese-built scooters. Suitable for most scooter types, but please check image against the original item.

15mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Timing chain tensioner gasket for GY6 125/150cc.

Cylinder base gasket - GY6 125/150cc

Valve cover gasket [rubber] - GY6 125/150cc

Isolator between carb and intake manifold.

Oil strainer spring for all 50cc GY6 139QMB/QMA 4-stroke engines and 125/150cc 152/157QMI.

Exhaust manifold gasket for all Chinese-built 4-stroke and Kymco 50cc 4-stroke vehicles. Also suitable for all Naraku 4-stroke tuning cylinder kits...