Products

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Naraku sport clutch spring set for all Minarelli original and Naraku sports clutches. 3 different graded spring rates supplied, with the rpm value ...

Tuned engines generally develop their power higher in the rev range and the engine can lose performance at lower revs, meaning poor drive. To comba...

Tuned engines generally develop their power higher in the rev range and the engine can lose performance at lower revs, meaning poor drive. To comba...

Top Racing offers you a cheap but very good clutch spring kit in three different weights. for original 3 shoe clutch and 107mm Top - Racing clutche...

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

Top quality racing clutch. Very sturdy design. For all originals and lightly tuned engines. Cheap alternative to replacing the original clutch.

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better r...

Current Naraku counterpressure springs with different alloying of the spring steel. A necessary addition where engines have been tuned. RPM increas...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +2000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

23mm connector boot for Arreche carbs with clamping flange.

24mm connector boot for Arreche carbs with clamping flange.

Plastic fan wheel air cooling for CPI, Keeway, Generic, Mawi, Longija and other Chinese-built 2-stroke engines.

Fan Wheel for air cooling. This item sits on the alternator rotor.

Fan Wheel for air cooling. This item sits on the alternator rotor and is attached with 4 screws.

Fan wheel in OEM-quality for Minarelli engines. Matches the dimensions of the original.

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/42 teeth.

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/52 teeth.

Crankcase breather system by Naraku. A Simple, yet effective design by Naraku suitable for all 139QMB/QMA (GY6 50) Kymco and GY6 125- 180cc 4- stro...

Crankcase cover for all vehicles with 10” wheels, generally used with 669mm v-belts. Supplied as shown, black.

Crankcase cover for all vehicles with 10” wheels and 4-stroke GY6 139QMB engines. The 10” wheel version generally takes a 669mm v-belt. Colour:...

Crankcase cover for all vehicles with 12” wheels and 4-stroke GY6 139QMB engines. The 12” wheel version generally takes a 729mm v-belt. Colour:...

Crankcase cover for all vehicles with 12-13” wheels or larger and 4-stroke GY6 139QMB engines. These wheel sizes generally take a 788mm v-belt. C...

Crankcase cover gasket [10”-669mm] - GY6 50cc

Crankcase cover gasket [12”-729mm] - GY6 50cc

Crankcase cover gasket [13”-788mm] - GY6 50cc

Crankcase cover gasket for Chinese-built scooters with GY6 125/150cc engines. The gasket is solely for the short engine blocks of the 4-stroke mode...

Crankcase cover gasket for 125/150cc GY6 engines with 853mm v-belts.