Products

Very well-engineered and robust sports clutch from Malossi. Can be adjusted by using different weights of clutch springs. We offer different clutch...

Currently the best the market has to offer in high-end clutches. Top quality with endless set up possibilities. Adjustable pre-tension with various...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...

Complete, pre-assembled clutch unit consisting of a rear converter torque driver, torque spring, clutch housing and clutch shoes. A defective clutc...

Complete Naraku torque driver. Torque drivers, counter pressure springs and clutch. No need to disassemble the original. No more over-stressing the...

Well priced racing clutch with lighter clutch shoes. Weight saving means engagement at higher revs. Harder clutch springs. A lower quality sports c...

Malossi Racing clutch spring set. Springs suitable for original 3 shoe clutches 107mm. Set comprises 3 different strengths of spring: Green = light...

Malossi racing clutch spring set for original clutches in 3 spring weights. black = light (touring) White = medium (sport) Yellow = hard (racing) h...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Tuned engines generally develop their power higher in the rev range and the engine can lose performance at lower revs, meaning poor drive. To comba...

Top Racing offers you a cheap but very good clutch spring kit in three different weights. for original 3 shoe clutch and 107mm Top - Racing clutche...

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

Top quality racing clutch. Very sturdy design. For all originals and lightly tuned engines. Cheap alternative to replacing the original clutch.

Completely pre-assembled hear converter unit comprising: torque driver, counter pressure springs and clutch. Often the cause of torn belts. Standar...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Crankcase gasket suitable for Peugeot vertical engined scooters.

In ARTEK crankshaft bearing sets high-quality SKF bearings and Corteco oil seals are used. SKF bearings are available in the required C4 tolerance ...

Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right crank bearings in metal cage and relevant shaft seals. Only bearings wit...

Cylinder studs including special nuts with M6 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

High-quality, precision cylinder gasket set from Spanish gasket specialists Artein Gaskets. The materials are carefully matched to the specific dem...

Cylinder gasket set for all air-cooled Peugeot-based original cylinders. See reference list. Set contains head, cylinder and exhaust port gasket.

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 2-stroke cylinde...

Naraku cylinder head studs for Piaggio cylinders. Great as a replacement for broken or damaged studs. Individual stud. The stud is 110mm long with ...

Handle bar mounts for downhill bars with 22mm diameter on all Peugeot scooters. Simply screw to the top yoke. 1x black clamp supplied

Handle bar mounts for downhill bars with 22mm diameter on all Peugeot scooters. Simply screw to the top yoke. 1x gold anodized clamp supplied

Handle bar mounts for downhill bars with 22mm diameter on all Peugeot scooters. Simply screw to the top yoke. 1x purple anodized clamp supplied

Aramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durab...

Good quality replacement drive belt for 50cc engines. Dimensions: 826*18.5 Replaces OEM-No.: Aprilia 82712R, Gilera 82712R, Italjet 210480852, Mala...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...