Products

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...

Well priced racing clutch with lighter clutch shoes. Weight saving means engagement at higher revs. Harder clutch springs. A lower quality sports c...

Malossi Racing clutch spring set. Springs suitable for original 3 shoe clutches 107mm. Set comprises 3 different strengths of spring: Green = light...

Malossi racing clutch spring set for original clutches in 3 spring weights. black = light (touring) White = medium (sport) Yellow = hard (racing) h...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Tuned engines generally develop their power higher in the rev range and the engine can lose performance at lower revs, meaning poor drive. To comba...

Top Racing offers you a cheap but very good clutch spring kit in three different weights. for original 3 shoe clutch and 107mm Top - Racing clutche...

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

Top quality racing clutch. Very sturdy design. For all originals and lightly tuned engines. Cheap alternative to replacing the original clutch.

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

23mm connector boot for Arreche carbs with clamping flange.

24mm connector boot for Arreche carbs with clamping flange.

Replacement temperature sensor for the cooling system on scooters with 50-125cc Piaggio engines.

Transparent coolant hose with 15mm internal diameter, 1m in length. 15mm coolant hoses are often used on scooters and mopeds with Minarelli engines...

New Airsal Race Pro crank up there with Racing cranks from Malossi MHR-RHQ, Metrakit Pro Race or the Polini Evolution. High alloyed 18NiCrMo5 steel...

New Airsal X-Treme Racing crank up there with racing cranks from Malossi MHR-RHQ, Metrakit Pro Race or the Polini Evolution. Great crank for cylind...

For 88cc / 80cc Big Bore cylinder kit from the Airsal Xtreme series, Airsal offers with 44mm bore crank. The 44mm bore means the crankcases need to...

In ARTEK crankshaft bearing sets high-quality SKF bearings and Corteco oil seals are used. SKF bearings are available in the required C4 tolerance ...

High rev bearing sets from Malossi up to high-end tuned Piaggio engines. Outer ring reduced to 10.8mm for better lubrication. Ball bearings with 8x...

High rev bearing set from Malossi suitable up to high-end tuned Piaggio engines. Half-open polyamide cage prevents overheating. Dimensions: 20x52x1...

Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right crank bearings in metal cage and relevant shaft seals. Only bearings wit...

Good quality crank for 50cc Piaggio AC and LC engines. Matches original 100%. Also suitable for lightly tuned to 70cc sports cylinders. Supplied wi...

Very high quality Malossi crank. Typical Malossi high quality. Full cheek design for higher pre-compression, for max fill and moves the power band ...

Great quality Naraku crankshaft for scooters with water- or air-cooled Piaggio engines. Corresponds to the original crank dimensions. Delivery incl...

Naraku heavy-cheeked racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and the p...

Naraku heavy-cheeked HPC racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and t...