Products

Replacement electronic control unit for the Malossi inner rotor ignition unit for scooters with Minarelli or Piaggio 2-stroke engines, as well as g...

Many vehicles are factory-fitted with restrictors or restricted CDI units. Malossi offer this clever RPM Control Racing CDI unit. 35,000 - 50,000V ...

Naraku racing CDI for all CPI, Keeway, Longjia, Generic and Minarelli-based Chinese-built engines with a double connector. Simply swap for the orig...

Naraku unrestricted CDI unit for horizontal Minarelli engines and some 2-stroke Chinese-built models. Not suitable for vehicles with a Ducati ignit...

Replacement CDI ignition box fits for Keeway, CPI and Generic models from 2003 on with Euro 2 exhaust certification. AC current / 2 Plug type (Plea...

CDI attachment rubber for ignition boxes 37x22mm on 4-stroke Chinese-built scooters.

CDI attachment rubber for ignition boxes 42x23mm on 4-stroke Chinese-built scooters.

Affordable replacement clutch shoes suitable for original or midly tuned 50cc engines, matches that of the original clutch dimensions. These are ou...

The Vicma Evo Racing and Hebo clutches are identical settings in principal. The Hebo differs mainly in the clutch linings. 3 Shoe clutch with varia...

ARTEK K2 107mm Adjustable Racing clutch. The patented system of the 3 shoe clutch allows the continuous change of the spring tension resulting in a...

Very high-quality 3 in 1 tool for blocking and removing the variator and clutch bell, including integrated hex wrench to loosen the clutch retainer...

Replacement clutch bell for lightly-tuned engines. Matches the dimensions of the original (107mm). Cheapest clutch we offer, but definitely worth t...

ARTEK K2 CNC 107mm Racing Clutch Bell. The patented system of the CNC machined clutch bell allows changing the clutch spring tension from the outsi...

Low-cost replacement clutch bell from Malossi. Shaky drive from standstill could indicate an issue with the clutch bell. This will lead to damage i...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

CNC milled Naraku racing clutch bell with 107mm inner diameter. The advantage of using this over the stock bell is the extremely low tolerance and ...

M10x1 nut for clutch bells for all Minarelli and Minarelli-based engines.

Polini Speed Clutch Bell. Better design than most original clutches and thus an ideal replacement for died down or misshapen originals. The improve...

Polini EVO II Speed Bell is lighter and more revvy than the previous model. The single-piece clutch bell is CNC-machined from a single block, unlik...

Reinforced clutch bell blocking tool. The pins grasp the bell and the nut can easily be removed. Attention! Minarelli engines have different sized ...