Products

Wheel-mounted speedo drive for speedo cables with two spokes, retainer nut and square drive. The speedo cable is suitable for Chinese-built 4-strok...

Wheel-mounted speedo drive for speedo cables with two spokes, retainer nut and square drive. The speedo cable is suitable for Chinese-built 4-strok...

Complete starter clutch. The counter piece of the electrical starter is responsible for uncoupling the starter once the engine is running. If this ...

Reinforced starter motor freewheel without starter sprocket, from Naraku. The starter mechanism is subjected to higher loading where engines have h...

Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke eng...

Starter motor for upright and horizontal 50cc Minarelli scooters.

Starter relay / solenoid for 1E40QMB 50cc 2 stroke Chinese import scooters.

Starter magnetic switch as mounted on the original vehicle. Suitable for many MBK/Yamaha and Peugeot scooters. Defective relays are often the cause...

Complete steering bearing sets including bearing races, ball bearings and locknuts. Bearing set for 27mm fork bridge.

Brake light switch for front brake discs. Suitable for GY6 50/125/150cc Chinese-built scooters.

Brake light switch for drum brakes with cable. The switch sits on the brake fitting. To avoid errors when ordering, please check the product image....

Right handlebar grip. outer length: 115mm inner length: 112mm throttle type: throttle twist grip

High Tech convertor plate in extremely resistant nitride steel from Malossi. Features straight guide grooves for better acceleration. 2x different ...

Reinforced Malossi MHR torque spring for Minarelli engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Reinforced Malossi MHR torque spring (White) for Minarelli engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Malossi reinforced counter pressure torque spring - yellow = super strong

Counterpressure spring mounting tool for convertor units up to 125mm outer diameter.

Counter pressure spring by Polini [Evo-Slider] with a diameter of 45mm for Minarelli/CPI/Morini scooters. The kit includes a eve slider plastic pla...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 45mm for Minarelli/CPI/Morini scooters. The kit includes a eve slider plastic pla...

The counterpressure spring presses the drive belt onto the rear pulley. A change is needed when tuning, the power increases. The torque spring work...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...