Products

81.3cc High performance aluminium cylinder kit from Airsal for 50cc 139QM GY6 Engines. Unlike cast iron cylinders, the aluminium cylinder offers mu...

Malossi BigBore cylinder with 52mm bore in aluminium with hard chromed liner. The bore = 87.9cc capacity. Original head may be retained according t...

With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. The piston has 2 additional CNC-machined oil grooves in ...

With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. As a 4 stroke cylinder is effectively just a hole, the e...

With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. The bore has been taken out to 52.4mm. The external diam...

Low-cost front brake disc, Asian-designed. For everyday use on untuned vehicles. Worn brake pads cause extreme wear to brake discs. Braking perform...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

A low-cost and good quality, standard replacement belt from NARAKU. The grip provides good acceleration, low loss of traction and optimal power tra...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Speed Belt by Polini. This v-belt features an aramid weave that makes it elastic and highly durable. Without doubt, one of the best v-belts in our ...

Standard replacement drive belt suitable for vehicles with 10” wheels. Dimensions: 669-18-30

This Variator sleeve replaces the original factory fitted sleeve and collar. This lifts the restricted power. The scooter will be capable of approx...

Gearbox input shaft for GY6 139QMB/QMA. This is where the clutch and converter pack are mounted.

SLS [secondary air system] gasket - 139QMB/A

Starter motor, suitable for all Chinese-built 4-stroke engines. This item can be used without a problem, even where the originally fitted item has ...

This bearing set contains all the relevant bearings found within the engine. A complete kit, at a low price. Crank main bearings not included. Not ...

Right-hand engine case, connects to the right-hand crankcase. Suitable for GY6 50cc 139QMB/QMA engines.

Complete replacement engine for Chinese-built 4-stroke scooters with 10” wheels (3.5x10 / 3.00x10 / 90/90-10 etc.). As a result of the time saved...

Complete replacement engine for Chinese-built 4-stroke scooters with 10” wheels (3.5x10 / 3.00x10 / 90/90-10 etc.). As a result of the time saved...

Dowel pin set for 50cc GY6 engines Delivery contains: 6x dowel pins for M7 (cylinder, cylinder head) 6x dowel pins for M6 (engine cases, crankcase ...

Complete engine gasket set for all Chinese-built 4-stroke GY6 139QMB/QMA scooters with 10” wheels; v-belt length 669mm, crank-gearbox input shaft...

Engine mount for 139QMB/QMA engines. This version has a round thrust bearing (tube). Check item against image. Bolt and nut not included!

Floating axle for engine mounts. Only the bolt and nut, engine mount not included.

Replacement motor bearings for scooters with 50-150cc GY6 engines and Kymco scooters with 2- and 4-stroke engines. Dimensions (Internal x External ...

Crank seals for 50cc GY6 139QMB engines. Set contains 4 seals for left and right-hand side, as well as for the gearbox output shaft.

Complete set of quality crank oil seals from Naraku, for scooters with 50cc Kymco 4-stroke and GY6 engines. Set contains all the important oil seal...

Bolt and nut set for GY6 50cc 139QMB/QMA engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual ...

After-market exhaust pipe for GY6 50cc scooters with 12 or 13 inch wheels. E-marked, compelling price! Delivery does not include exhaust gasket whi...

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Exhaust manifold gasket for all Chinese-built 4-stroke and Kymco 50cc 4-stroke vehicles. Also suitable for all Naraku 4-stroke tuning cylinder kits...

Heat shield replacement for 101 Octane exhausts.

Exhaust heat guard. Often becomes damaged in a spill and changing it will refresh the look of your machine. Delivery is for 1 head guard in black.

The NARAKU crossover combines Racing design with an internal structure that is tailored to the requirements of 4-stroke engines. Road legal thanks ...

The NARAKU crossover combines Racing design with an internal structure that is tailored to the requirements of 4-stroke engines. Road legal thanks ...

SLS Exhaust system gasket - 130QMB/A