Aprilia

Malossi MHR carburettor kit contains Dellorto 19mm PHGB carb and all necessary mounting parts. Originally for regulated scooter trophy series with ...

Malossi 4 reed racing reed block. 0.3mm thick reeds give great power when used with the Malossi Big Valve blocks. Malossi offers 2 different thickn...

Malossi High Tech drive belt for racing or tuned engines. Cheaper alternative to the original. Aramid reinforcements are tear resistant even under ...

Malossi strengthened counterpressure springs for rear Malossi convertors, Piaggio Type. Counterpressure springs place the drive belt under tension,...

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28-30mm carb connection for MHR ...

Digital micro-processor-controlled Racing ignition system from Malossi with internal rotor and dynamic ignition point adjustment. Engine revs notic...

Malossi MHR Team carburettor kit. MHR (Malossi Hyper Racing) team stands for high end racing for the Malossi Team racing scooters. The 21mm PHGB De...

Malossi 45° MHR Racing performance reed block with 2 single-piece reeds. 0.3mm for improved gas flow.Straight from the Malossi MHR racing departme...

Malossi MHR Replica 70cc Aluminium racing cylinder on par with Polini Corsa with improved thermal characteristics. Minimum of 17.5mm carb recommend...

Malossi MHR Big Bore cylinder with 50mm bore is one of the fastest cylinders you can mount alongside the 2Fast model. 77cc with approx. 25bhp to be...

Malossi MHR 70cc with T6 design, 6 overflow ports and a 2-piece outlet port. Approx. 20bhp achievable with the relevant tuning parts. 1-piece head ...

Malossi 70cc High End Racing cylinder with 2-piece cylinder head , 7 overflow ports and 2-piece outlet. Great low down when used with the Team exha...

Malossi 50cc MHR cylinder kit with 6 overflow ports and 3-piece outlet port just as on the 50cc Team cylinder. Single piece head with performance u...

Malossi MHR carburettor kit for solid power curve right up to the top end. Dellorto 19mm PHBG is a solid starting point for mid to high end cylinde...

Malossi MHR Team exhaust system, specially tuned for the Team cylinder. Very good low down torque that you don’t generally find on high-end cylin...

Malossi 70cc High End Racing cylinder with 2-piece modular cylinder head , 7 overflow ports and 2-piece outlet. Great low down when used with the T...

Top quality cast iron 70cc Malossi cylinder. Clean torque curve and great for everyday use. Comes with all mounting parts, gaskets and instructions...

Malossi 50cc sports cylinder kit with altered timing and optimized outlet port for nearly double the power of the original. Ideal if you do not wan...

Malossi MHR intake manifold with short opening and angled connection. 21/24.5mm variant has a 21mm opening and the 24.5mm carb connection for 15mm-...

Malossi reinforced counter pressure torque spring - yellow = super strong

Reeds for original factory reed block with carbon membranes. These cause less damaged to the engine should the reed petals break up than metal alte...

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

MHR (Malossi Hyper Racing) Team products are pure racing components. Large diameter variator for use with overrange drive belt and convertor for ex...

Malossi Variator Multivar 2000 . In contrast to standard MULTIVAR the MULTIVAR 2000 uses 19x15.5mm variator rollers. The recalculated roller tracks...