Aprilia

Replacement cylinder head for 50cc Piaggio LC cylinders from ’98 on. Head can be used on older models with a pentagonal barrel. This cylinder hea...

NARAKU sports variator for Piaggio engines from1998 on. When calibrated, this variator provides good acceleration at higher top speeds. The restric...

Malossi draw on 20 years of tuning transmissions. A longer ratio allows for higher top end speed, but should only really be used with a tuned engin...

Very high quality Malossi crank. Typical Malossi high quality. Full cheek design for higher pre-compression, for max fill and moves the power band ...

Malossi MHR carburettor kit contains Dellorto 19mm PHGB carb and all necessary mounting parts. Originally for regulated scooter trophy series with ...

Malossi draw on 20 years of tuning transmissions. A longer ratio allows for higher top end speed. Longer ratios are only really suitable on tuned e...

Malossi 4 reed racing reed block. 0.3mm thick reeds give great power when used with the Malossi Big Valve blocks. Malossi offers 2 different thickn...

Malossi High Tech drive belt for racing or tuned engines. Cheaper alternative to the original. Aramid reinforcements are tear resistant even under ...

Malossi strengthened counterpressure springs for rear Malossi convertors, Piaggio Type. Counterpressure springs place the drive belt under tension,...

Naraku small end bearing [HD-Quality] - 12x17x13. Suitable for Piaggio, Gilera, Kymco, SYM.

Top quality cylinder kit by Naraku. An extra emphasis was put on the piston quality. The Naraku piston has a molybdenum coating, so that cylinder a...

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Piaggio AC and LC engines. Delivery as shown, including: piston rin...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 50mm for Piaggio / Gilera scooters. The kit includes a eve slider plastic plates ...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 50mm for Piaggio/Gilera scooters. The kit includes a eve slider plastic plates fo...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 50mm for Piaggio / Gilera scooters. The kit includes a eve slider plastic plates ...

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single lever i...

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 2-stroke cylinde...

The Naraku Traffic system combines contemporary fresh lines with a pleasant engine note. This system integrates very well with new modern vehicles....

Complete alternator stator for carburetted Piaggio engines from 1999 onwards. Stator supplied ready to install.

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28-30mm carb connection for MHR ...

Replacement left-hand mirror in original design with E-certification for Aprilia and Italjet scooters. Cheaper alternative to expensive original it...