Aprilia

Among insiders, the Turbo Kit name is synonymous with peak performance. The Racing Turbo Kit Exhaust Carreras 80 is designed for 80cc racing cylind...

NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All d...

NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All d...

The Heidenau K66 is a long-life all-weather tyre. The profile blocks are specially cut for top handling performance. The channels guarantee lots of...

Piston kit for 50cc sports cast iron Airsal cylinder kit for geared mopeds with Minarelli AM engines.

Cylinder head for the 50cc sports cast iron cylinder kit from Airsal for geared mopeds with Minarelli AM engines.

Airsal cast iron cylinder kits add more depth to the Airsal product range. Greater attention has been paid here to the ports, the design of which h...

Naraku heavy-cheeked HPC racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and t...

Sporty tyre for geared scooters and low-power bikes with convincing handling and directional transfer. The K64 offers top mileage and good wet-weat...

The Heidenau K66 is a long-life all-weather tyre. The profile blocks are specially cut for top handling performance. The channels guarantee lots of...

Sporty scooter tyre from Heidenau with K63 profile. The K63 tyre is characterised by its top mileage and convincing handling characteristics. Very ...

Naraku heavy-cheeked racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and the p...

Great quality Naraku crank for geared mopeds with Minarelli AM, Generic, KSR-Moto, Keeway, Motobi, Ride, CPI, 1E40MA, 1E40MB engines. Corresponds t...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Cylinder studs incl. M7 threaded nuts for securing the cylinder. Set of 4 studs and nuts, 115mm in length. Suitable for all geared mopeds with Mina...

Replacement thermostat for cooling system on Minarelli LC Scooters and Gear Bikes with Minarelli AM engines. Opens at 70°C.

Arreche 23.5mm sealing ring for carbs with threaded flange.

Arreche 25mm sealing ring for carbs with threaded flange.

Athena Racing replacement exhaust valve gasket for geared motorcycles using the Minarelli AM6 engine.

Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the ex...

Replacement reed block with plastk reeds. Rather than the usual metal reeds, this item uses plastic reeds. Metal membrane petals can cause massive ...

Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the ex...

Small but great-looking coloured oil filler bolts in blue, red, orange or gold. 1x bolt of the required size supplied with relevant O-ring.

Long-life steel chain sprocket. 51T / 420. Original item on the following geared mopeds: APRILIA MX 50 SM Super Motard, 2002-2003 GENERIC Trigger 5...

17-inch scooter tire with road surface in the dimension 130/70-17 62N.

Low-cost and solid racing carburettor from Arreche with 21mm inlet. Supplied with basic tune with additional main jet. Jets may need to be changed ...

Licenced replica of the English Amal carburettor from Arreche, 19mm. Supplied with additional larger main jet. Fits the original intake manifold. C...

Licenced replica of the English Amal carburettor from Arreche, 17.5mm. Supplied with additional larger main jet. Fits the original intake manifold....

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Low-cost and robust Arreche 16mm carburettor for tuning or original replacement. Basic tune with larger jet. Original airbox may be retained depend...

Carbone Lorraine V-Brakes sintered pads for scooters, motorcycles, mopeds and quads. Outstanding braking performance even in the wet, less slip and...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Small but great-looking coloured oil filler bolts in blue, red, orange or gold. 1x gold bolt of the required size supplied with relevant O-ring.

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

High-quality replacement piston for 50cc original (cast iron, 40.25mm) and 50cc Naraku cylinder kits for Minarelli AM, Generic, KSR-Moto, Keeway, M...

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...

Alternator rotor puller. Required for working on the alternator or parts under it and on crank bearings. Pressure bolt screws into the rotor and te...

M10x1.25 nut for the rotor on the alternator. Suitable for Minarelli AM, Generic, KSR-Moto, Keeway, Motobi, Ride, CPI, 1E40MA, 1E40MB engines and o...

Replacement taillight for Aprilia RX 50/ 125, MX 50, ETX 125, Tuareg 50/ 125 Rally geared mopeds up to 2005. Matches the dimensions of the original...