Aprilia

NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark star...

Electronic control unit with variable pre-ignition for scooters with Piaggio 50cc 4-stroke, 4-valve engines. Plug and play technology that simply r...

Carrier sprocket that matches the dimensions of the original.

The Heidenau K42 Snowtex winter tyre for scooters (e.g. Simson) with 16 inch wheels. This tyre guarantees great handling on cold, wet surfaces. Tha...

Malossi racing clutch spring set for original clutches in 3 spring weights. black = light (touring) White = medium (sport) Yellow = hard (racing) h...

The finest clutch bell you could use, with cooling vents for improved heat dispersion and reduced slip on the bell and plates.

Standard brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 140x25mm. For rear brake use. Suitabl...

Solid aluminium machined riser kit. The lift kit is 40mm. The scooter looks great and you get a sportier seating position. An absolute must for all...

Solid aluminium machined riser kit. The lift kit is 40mm. The scooter looks great and you get a sportier seating position. An absolute must for all...

Solid aluminium machined riser kit. The lift kit is 40mm. The scooter looks great and you get a sportier seating position. An absolute must for all...

Solid aluminum machined height adjuster kit. This height adjuster kit is 38mm. The strut can be mounted using the four holes onto the shock absorbe...

Aluminium-machined height adjuster set. 38mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 38mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 38mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 38mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 38mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 38mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 32mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 32mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 32mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 32mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 32mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Manual fuel tap for Peugeot Speedake, Zenith and Buxy scooters. Often changing the complete tap resolves many fuel-related issues. Suitable for all...

12V replacement indicator relay as originally fitted in many scooter types. 90° offset 2-pin connection. Please check product image. Suitable for ...

Starter magnetic switch 12V, 80A as mounted on the original vehicle. Suitable for many MBK/Yamaha and Peugeot scooters. Defective relays are often ...

Aluminium belt pulley with integrated air scoops. Very temperature stable component, smooth running and low-slip. Great for racing engines. Not for...

Standard brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 140x25mm. For rear brake use. Suitabl...

Malossi Special Belt is a high quality and low-slip belt for use on standard and tuned sports engines. Good grip means performance and minimal slip...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Malossi strengthened counterpressure springs for rear Malossi convertors, Piaggio Type. Counterpressure springs place the drive belt under tension,...

Rotor puller for removing the alternator flywheel. No specific vehicle fitment. 26x1mm thread, but please measure thread prior to ordering.

Counter pressure spring by Polini [Evo-Slider] with a diameter of 50mm for Piaggio / Gilera scooters. The kit includes a eve slider plastic plates ...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 50mm for Piaggio/Gilera scooters. The kit includes a eve slider plastic plates fo...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 50mm for Piaggio / Gilera scooters. The kit includes a eve slider plastic plates ...

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

Replacement mirror in original design with E-certification for Aprilia scooters and geared mopeds. Cheaper alternative to expensive original items....

Replacement speedo cable in original dimensions for Aprilia Scarabeo 4-stroke -07, Scarabeo 100 and Scarabeo Di-Tech Injection 01-04. Design and du...

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

Rectifier / Controller changes the AC into DC. If the battery no longer charges properly, the rectifier may be the cause. This item matches the ori...

Polini Air Speed variator pulley, great upgrade for the original due to design producing increase cooling.

Malossi reinforced counter pressure torque spring - yellow = super strong

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Replacement camshaft bearing as replacement for the original when changing the camshaft. 12x32x10

Sport shock (white) for Piaggio/Gilera scooters, harder spring than the original and can be adjusted. Adjustment tool must be purchased separately....