Aprilia

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

Vacuum-operated fuel tap for various scooters with Piaggio engines. Fitment diameter in tank: 15mm

Malossi piston ring set for all 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines. Suitable for all 70cc Malossi pistons with 2...

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Twist Control: an absolute drive innovation from Naraku. Twist Control absorbs the torsion from the converter and even out the loss of power from t...

Low-cost seal set for membrane blocks for Piaggio 50cc 2-stroke engines. Please note: generally an upper and lower seal is required.

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...

M12x1.25mm nut for rotor and pulley on the crankshaft. Suitable for all special cranks with M12 thread for Piaggio and Minarelli engines. E.g.: Sta...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Very low-cost intake manifold for derestricting the inlet port. This increases the size of the opening to 21mm. This is a must when using a larger ...

The Heidenau K62 is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arranged for opti...

Good quality 17.5mm carburettor from Naraku for Piaggio engines. Great alternative to those expensive top end brands with no compromise on quality...

Replacement thermostat for cooling system on various Aprilia, Piaggio, Gilera and Derbi engines. Opens at 70°C. Can replace OEM part 483395.

Replacement reed block in OEM quality. Rather than the usual metal reeds, this item uses plastic reeds. Metal membrane petals can cause massive dam...

Float bowl gasket for Keihin PWK carburettor.

Cylinder studs including special nuts with M6 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

Water pump repair kit for various Piaggio LC engines. All pictured parts included.

Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm The current version of the Naraku counter pressure spring uses a modified alloy sprin...