Aprilia

Malossi piston ring set for all 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines. Suitable for all 70cc Malossi pistons with 2...

Replacement piston for 70cc Malossi sports cylinder for Minarelli and Morini AC + LC engines with 10mm gudgeon pins. Kit comes with gudgeon pin, 2x...

Reinforced Malossi MHR torque spring for Minarelli engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Malossi reinforced counter pressure torque spring - yellow = super strong

Malossi back plate for Minarelli The result is clean shifting and low loss of power, For tuned and original scooters.

Cylinder gasket set for all 50 and 70cc sports cylinder kits from Malossi for horizontal Minarelli AC engines.

Malossi 70cc MHR Cylinder kit. One of the strongest with 70cc capacity, set up for 12mm gudgeon pins. 6 over flow ports and 2-piece outlet port. Ti...

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28mm carb connection for MHR Tea...

Malossi 45° MHR Racing performance reed block with 2 single-piece reeds. 0.3mm for improved gas flow. Straight from the Malossi MHR racing departm...

Malossi robust, high compression MHR Racing crank with 39.2mm standard stroke and 80mm standard rod length, designed for 10mm gudgeon pins. Safe up...

Reinforced Malossi MHR torque spring (White) for Minarelli engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Malossi Multivar variator for great drive and shifting, as well as increased top end. Original drive belt can be retained. Excellent Malossi qualit...

Malossi replacement piston 47mm diameter with rings, gudgeon pin and circlips for the 70cc MHR Replica kit for scooters with upright Piaggio and Pe...

High rev bearing set from Malossi suitable up to high-end tuned Minarelli engines. Half-open polyamide cage prevents overheating. Dimensions: 20x47...

High rev bearing set from Malossi suitable up to high-end tuned Minarelli engines. Half-open polyamide cage prevents overheating. Dimensions: 20x47...

Replacement bolts for the internal rotor ignition systems from Malossi for scooters with Piaggio AC or Minarelli engines.

Replacement electronic control unit for the Malossi inner rotor ignition unit for scooters with Minarelli or Piaggio 2-stroke engines, as well as g...

Malossi clutch bell for tuned engines. Great racing component. Precision-balanced with cooling grooves in the outer ring for temperature reduction ...

Malossi 50CC MHR Cylinder kit. One of the strongest with 50cc capacity, set up for 10mm gudgeon pins. 6 over flow ports and 3-piece outlet port. Ti...

Malossi MHR Team carburettor kit. MHR (Malossi Hyper Racing) team stands for high end racing for the Malossi Team racing scooters. The 21mm PHGB De...

Malossi MHR carburettor kit for solid power curve right up to the top end. Dellorto 19mm PHBG is a solid starting point for mid to high end cylinde...

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Intake manifold features 30mm opening, maki...

High Tech convertor plate in extremely resistant nitride steel from Malossi. Features straight guide grooves for better acceleration. 2x different ...

Malossi 4 reed racing reed block. 0.3mm thick reeds give great power when used with the Malossi Big Valve blocks. Malossi offers 2 additional membr...

Malossi draw on 20 years of tuning transmissions. The transmission must be changed on Minarelli engines for higher top end. Longer ratios are only ...

Malossi MHR intake manifold with short opening and straight connection. 22/24.5mm variant has a 22mm opening and a 24.5mm carb carb connection 19-2...

Malossi outer drive pulley with optimized air scoops for improved cooling. Improved flange angle which is tuned for the Malossi Multivar 2000 varia...

Reeds for original factory reed block with carbon membranes. These cause less damaged to the engine should the reed petals break up than metal alte...

Many vehicles are factory-fitted with restrictors or restricted CDI units. Malossi offer this clever RPM Control Racing CDI unit. 35,000 - 50,000V ...