Aprilia

Replacement reed block with steel petals. Suitable for all horizontal Minarelli engines, CPI, Keeway, Generic, Mawi, Longija, Morini engines, April...

Fan cover for CPI, Generic, Keeway, Mawi, Longija right-hand side fans and air-cooled Minarelli engines.

The most durable v-belt Polini offers has additional aramid fibre inlays that make this belt extremely resistant to tearing. This is not Polini’s...

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Brake shoe set with ribbed surface. The ribbed section prevents the over-accumulation of brake dust deposits, which generally lead to glazing and a...

Very low-cost intake manifold for derestricting the inlet port. This increases the size of the opening to 21mm. This is a must when using a larger ...

Malossi reinforced counter pressure torque spring - yellow = super strong

Replacement rubber cap for oil tanks on the 2-stroke Chinese scooters.

rear pulley converter kit incl. clutch / clutch torque converter assembly

M10x1.0mm Flywheel nut suitable for Derbi Senda engines and other models with the M10, 1.0mm thread on the crankshaft.

Low-cost Racing membrane block in OEM-quality, with 6 reeds. Suitable for all scooters with Piaggio engines from 1999 on. Suitable for all horizont...

Low-cost import exhaust system for scooters with horizontal Minarelli engines. Originally for 10” wheel scooters, but with a few minor modificati...

Ignition coil with lead for all 50cc Morini engines. Matches original item. Good value for money. 2 Pins

The Heidenau K59 Reinforced is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arrang...

The Heidenau K62 is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arranged for opti...

Good quality 17.5mm carburettor from Naraku for Piaggio engines. Great alternative to those expensive top end brands with no compromise on quality...

Replacement thermostat for cooling system on various Aprilia, Piaggio, Gilera and Derbi engines. Opens at 70°C. Can replace OEM part 483395.

10mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Very low-cost intake manifold for derestricting the inlet port. This increases the size of the opening to 21mm. This is a must when using a larger ...

Very good quality aftermarket crank for horizontal 50cc Minarelli AC and LC engines. The crank is a 100% match to the original and is an outstandin...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Replacement reed block in OEM quality. Rather than the usual metal reeds, this item uses plastic reeds. Metal membrane petals can cause massive dam...

Float bowl gasket for Keihin PWK carburettor.

Standard Bosch spark plug. This spark plug matches the heat value and construction of the original. Unlike the NGK BR7HS or Bosch WR5AC spark plugs...

Aftermarket part for defective kick-start shafts. Item matches design and size of the original.

CDI attachment rubber for ignition boxes 42x23mm on 4-stroke Chinese-built scooters.

Cylinder studs including special nuts with M6 thread for securing the cylinder. Set of 4 with nuts. Length: 110mm, nuts are 13mm in length and have...

The Naraku 50cc cast iron cylinder is a an affordable and robust alternative for those who are looking for a replacement top end due to cylinder or...

Malossi Sport 124 is a high torque cast iron cylinder kit with robust piston and 2x rings. Easy to tune, great for beginner tuners. The cylinder ki...

The Naraku 50cc cast iron cylinder is a an affordable and robust alternative for those who are looking for a replacement top end due to cylinder or...

NARAKU sports variator for Morini engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction of the o...