ATU Explorer

Naraku quality shaft seals for scooters with 125/150cc GY6 engines. Shaft seals are required on the rear of the convertor and seal in the convertor...

Complete set of quality crank oil seals from Naraku, for scooters with 50cc Kymco 4-stroke and GY6 engines. Set contains all the important oil seal...

Reinforced starter motor freewheel without starter sprocket, from Naraku. For original and tuned scooters with Minarelli-based, Chinese-built engin...

Naraku cylinder stud for horizontal Minarelli and Minarelli-based cylinder. Great as a replacement for broken or damaged studs. One individual stud...

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Special belt size...

Naraku is known as a specialist in 4-stroke Asian-built scooters and Racing Planet now has a new, perfectly fitting variator locking tool. This sim...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Exhaust heat guard. Often becomes damaged in a spill and changing it will refresh the look of your machine. Delivery is for 1 head guard in black.

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on 70cc Naraku 2-stroke cy...

NARAKU sports variator for GY6 and 50cc Kymco 4-stroke engines as well as tuned Kymco/ SYM s-stroke engines. When calibrated, this variator provide...

Piston ring set for 70cc Naraku cylinder kit for 1E40QMB engines with 12mm gudgeon pin.

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Minarelli 1E40QMB engines. Delivery as shown, including: piston rin...

This piston ring set for 90cc GY6 cylinders (52.4mm bore) is specially manufactured for the 90cc Naraku 4-stroke cylinder (NK100.52).

OEM-quality valve stem oil seal made by Taiwanese and Japanese manufacturers. Naraku offers a set of 2 valve seals for 4-stroke cylinder heads. Exc...

This piston ring set for 50cc GY6 cylinders (39mm bore) can be optionally used in Naraku 4-stroke cylinders, but is also suitable for original cyli...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

These Naraku cylinder gasket sets contain all the necessary gaskets from the base gasket upwards and can be optionally used on the Naraku 2-stroke ...

The Naraku Traffic system combines contemporary fresh lines with a pleasant engine note. This system integrates very well with new modern vehicles....

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Great value...

The original exhaust manifold on most Keeway, Explorer scooters restricts the power a lot, which significantly hampers gas flow. With the NARAKU ma...

Naraku Crossover exhaust silencer.

Replacement variator for 50cc 2-stroke CPI, Keeway, Generic engines and Chinese-built Minarelli-based 50cc 2-stroke engines. The weight tracks corr...

Naraku Racing Variator, V.2 for all 50cc 2-stroke CPI, Keeway, Generic engines with a 16mm tail shaft. The weight surfaces are moved very far to th...

Naraku crankshaft in OEM-quality to match Japanese and Taiwanese alternatives. Kitted with high quality, heavy duty quality bearings which allows f...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Naraku Crossover exhaust silencers.

Replacement gaskets for Naraku Crossover exhaust silencers.

Retaining clamp for Naraku Crossover exhaust silencers.

The NARAKU crossover combines Racing design with an internal structure that is tailored to the requirements of 4-stroke engines. Road legal thanks ...

Common problems with stock cylinder heads on the Chinese 4-stroke engines are generally known to be expensive and involve high costs. Chinese repla...

Naraku carburettor repair kit for 50-90cc carbs. Comes with adjustable needle, needle clip, 80 main jet, pilot jet, float bowl gasket, idle jet, mi...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku unrestricted Racing CDI with improved/advanced mapping for 50cc 4-Stroke Chinese imported scooters. Perfect CDI unit for tuning requirements...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and...

The Naraku HS-Racing is a well-engineered High Speed variator for Minarelli-based 2-stroke engines with a 16mm tail shaft. The variator comes with ...

Repair kit for Chinese GY6 139QMB/QMA original carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idl...

CNC-machined replacement piston for 52.4mm Naraku cylinder with molybdenum coating. Comes complete with piston rings, oil scraper rings, gudgeon pi...

Complete cylinder gasket set for all 51mm and 52.4mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is ...

Complete cylinder gasket set for all 44mm Naraku or 44mm Chinese-built 4-stroke cylinder sets.

With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. As a 4 stroke cylinder is effectively just a hole, the e...