ATU Explorer

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

SLS Exhaust system gasket - 130QMB/A

SLS [secondary air system] gasket - 139QMB/A

Cylinder base gasket - GY6 50cc

Crankcase cover gasket [10”-669mm] - GY6 50cc

M10x1 nut for clutch bells for all Minarelli and Minarelli-based engines.

Exhaust system with SLS connector in OEM quality. Only for vehicles with a factory-fitted SLS (see image 2).

Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke eng...

Brake pad set for single piston callipers on Chinese-built 50/125/150cc 4-stroke machines. Unfortunately there is no information regarding which pa...

The oil plug also measures the oil level and there is a measuring gauge on the dip stick, attached to the underside of the plug. Check item to be r...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Structurally, the original V-belt pulley with a star-shaped carrier is an inferior component. The star shim is just too thin for the forces acting ...

Plastic fan wheel for variators on GY6 50cc 139QMB/QMA engines. Belt damage is caused by too much heat in the drive area. For this reason, the fan ...

Naraku racing CDI for improved performance and speed. Simply swap for the original unit. You can get rid of your restricted factory-fitted CDI. Att...

O-ring for isolators and intake manifolds. The isolator sits between the carb and the intake manifold and often causes poor engine running as a res...

This replacement pulley for standard motors corresponds in shape and dimensions to the original and provides an inexpensive alternative when pulley...

Complete, pre-assembled clutch unit consisting of a rear converter torque driver, torque spring, clutch housing and clutch shoes. A defective clutc...

Complete starter motor incl. cables, ready to install. Number of teeth: 9 Diameter Shaft: 9mm Distance of mounting holes: 65mm

Naraku racing CDI for all CPI, Keeway, Longjia, Generic and Minarelli-based Chinese-built engines with a double connector. Simply swap for the orig...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The pisto...

Plastic fan wheel air cooling for CPI, Keeway, Generic, Mawi, Longija and other Chinese-built 2-stroke engines.