ATU Explorer

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Great value...

Replacement fuel tank cap in original design for Keeway F-ACT 50/ 125/ 150, Focus 50/ 125/ 150. Can replace tank cover with OEM-No. 88400BMBT000 / ...

The original exhaust manifold on most Keeway, Explorer scooters restricts the power a lot, which significantly hampers gas flow. With the NARAKU ma...

Replacement right-hand mirror in original design with E-certification for Benelli, Generic, Vespa and Keeway Scooters. Cheaper alternative to expen...

Replacement right-hand mirror in original design with E-certification for various Benelli, Generic, Vespa and Keeway scooters. Cheaper alternative ...

Replacement left-hand mirror in original design with E-certification for various Benelli, Generic, Vespa and Keeway vehicles. Cheaper alternative t...

Replacement speedo cable in original dimensions for Aerox and Nitro from 2003 and Suzuki Katana. Design and dual-side mounts match the original sco...

Replacement speedo cable in original dimensions for Keeway and Suzuki scooters and motorcycles. Design and dual-side mounts match the original spee...

Complete igntion lock set for Keeway Focus, Fact, RY8 and the CPI Aragon and Explorer (A.T.U.) . Excellent quality and price making this a perfect ...

Rear centre strip fairing in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Lower right side fairing in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Under seat storage / helmet compartment in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Upper right side fairing in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Upper left side fairing in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Floor panel / floor board in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Black headlight surround fairing. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Upper front cover fairing in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

MTKT Racing under tray with lasered MTKT logo on the bracket. A rare piece from a small one-man tuning operation. No mass-produced parts, just limi...

Naraku Crossover exhaust silencer.

Dellorto 17.5 mm carburettor. For scooters with Minarelli or CPI engines. Recommended even for untuned engines, as the carburettor is easier to tun...

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

Replacement variator for 50cc 2-stroke CPI, Keeway, Generic engines and Chinese-built Minarelli-based 50cc 2-stroke engines. The weight tracks corr...

Naraku Racing Variator, V.2 for all 50cc 2-stroke CPI, Keeway, Generic engines with a 16mm tail shaft. The weight surfaces are moved very far to th...

Complete replacement engine for Chinese-built 4-stroke scooters with 12” wheels. As a result of the time saved, at times replacing the entire eng...

Complete replacement engine for Chinese-built 4-stroke scooters with 10” wheels (3.5x10 / 3.00x10 / 90/90-10 etc.). As a result of the time saved...

The name says it all: racing spark plugs are for motorsport use and their characteristics make them less suitable for road use. Where these plugs m...

High-Tech straight from the lab NGK has taken a massive step forward in spark plug technology with the new Iridium IX. Laboratory testing has shown...

High-Tech straight from the lab NGK has taken a massive step forward in spark plug technology with the new Iridium IX. Laboratory testing has shown...

High-Tech straight from the lab NGK has taken a massive step forward in spark plug technology with the new Iridium IX. Laboratory testing has shown...

Crank seals for 50cc GY6 139QMB engines. Set contains 4 seals for left and right-hand side, as well as for the gearbox output shaft.

Replacement wiring loom for Jinlun Fighter 50 (only!), as originally factory-fitted. This loom can however be used as a donor item for other looms ...

Very cleanly crafted Minachrom 50cc cast iron cylinder with oval outlet port. Ideal replacement cylinder with a fairly significant power increase u...

Well priced replacement cylinder head for 50cc original cylinders.d=40mmSuitable for all air-cooled Minarelli engines with horizontal cylinders and...

Naraku crankshaft in OEM-quality to match Japanese and Taiwanese alternatives. Kitted with high quality, heavy duty quality bearings which allows f...

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Good quality crank for 50cc Euro 2 engines with 12mm gudgeon pins. Matches original 100%. Also suitable for lightly tuned to 70cc sports cylinders....