Baja

This gasket sits in the valve cover in an identical metal plate and seals the crankcase breather. For valve covers with and without SLS.

Right-hand crankcase gasket - GY6 50cc

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

The Tecnigas Next-R suitable for GY6 50cc 4-stroke and 4-stroke engines Kymco. This exhaust has a good energy yield with relatively low sound. In t...

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 22 tooth version. This gear has 47 teeth.

SLS with hose for GY6 50cc exhaust systems with SLS. Often this part is necessary if the mounting bolts have rusted or locked, or the engine is run...

Naraku unrestricted Racing CDI with improved/advanced mapping for 50cc 4-Stroke Chinese imported scooters. Perfect CDI unit for tuning requirements...

Valve cover for GY6 125/150cc 4-stroke 152/157QMI engines WITH SLS system. The valve cover is ready to install and delivered as shown. Valve cover ...

Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve c...

139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted...

Replacement drive belt suitable for GY6 125/150cc engines with long blocks. Dimensions: 835-20-30

Rubber stops for the engine rockers. 2 items generally required when changing out.

Rubber centre stand stop for 125/150cc Chinese-built scooters. Suitable for most scooter types, but please check image against the original item.

Complete intake hose for the crankcase cover, with clamp. Suitable for crankcase covers on 125/150cc GY6 4-stroke engines.

Bolt and nut set for GY6 125/150cc engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine...

Outer v-belt pulley for GY6 125/150cc 4-stroke Chinese-built engines.

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and...

Alternator stator for GY6 125/150cc machines. There are many variations of this alternator of these engines. They can however be quite easy to iden...

Complete air filter element [type 1] for 125/150cc Chinese GY6 4-stroke scooters. As there are so many variations to this scooter, please check the...

Complete shock unit for 125/150cc Chinese-built 4-stroke scooters, chromed. Non-adjustable. Length: 335mm, please ensure you are ordering the corre...

Complete aftermarket piston for GY6 150 4-stroke Chinese-built models. Includes gudgeon pin, piston, piston rings, oil scraper rings and gudgeon pi...

Timing chain for GY6 4-stroke engines 152/157 QMI with 125 or 150cc. Chain has 45 links.

Grinding and mechanical noises when starting the engine are often a sign that the starter clutch is faulty. The carrier sticks and no longer releas...

Complete steering bearing set for 125/150cc 4-stroke Chinese-built scooters The manufacturer used a tapered roller bearing as the lower bearing and...

Aluminum Kickstarter [Light] in carbon look suitable for Minarelli and Peugeot engines.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

Complete oil pump for 125/150cc GY6 engines. Delivery as shown.

Standard camshaft for 125cc and 150cc GY6 engines as originally factory-fitted.

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/42 teeth.

Primary gear shaft for Chinese 125/150cc scooters with the 152/157QMI engine. This is where the clutch is mounted. This gear has 15 teeth as per or...

Gearbox output shaft - long version. For rear wheel mounting. Total length: 197mm, used for vehicles with additional swinging arm on the right-hand...

Isolator between carb and intake manifold.

Brake light switch for rear disc brakes on GY6 50/125/150cc Chinese-built scooters with rear disc brakes.

Original intake manifold for all GY6 125/150cc 152/157QMI engines. Delivery includes clamp and O-ring. 24mm opening.

Repair kit for Chinese GY6 139QMB/QMA original carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idl...

Rear brake cable Rusted, seized or sticking brake cables can be a safety risk. If you notice any of these symptoms, it’s time to get it sorted. S...

Folding kickstarter lever for 125/150cc GY6 4-stroke Chinese-built engines.

Standard CDI ignition unit as factory-fitted.

Complete timing chain tensioner suitable for 125/150cc GY6 Chinese-built 4-stroke engines. Delivery includes tensioner tool, which is only to be us...

Crank seals for 125/150cc GY6 4-stroke engines. Set contains 4 seals for left and right-hand side, as well as for the gearbox output shaft.

Replacement aftermarket clutch bell. Already blued clutch bells tend mean slipping and deforming of the plates. This means the bell cannot run true...

Low-cost standard brake disc in original quality. This brake disc has 3 mounting points and a diameter of 180mm. For front and rear disc brakes wit...

Aftermarket front brake disc. 3-point mounting and external diameter of 220mm. Supplied as shown.

Complete front brake calliper for 125/150cc Chinese-built GY6 scooters, incl. brake pads. Those callipers are factory-fitted as either 1 or 2 pisto...

Variator back plate.