Baja

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Naraku Sports Contra Spring V.2 +2000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku sports clutch. Solid sports clutch that engages 1500-2000rpm higher than standard, meaning better drive and traffic light starts. Fiber rein...

Petrol cap centre fairing in silver. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Black pillion cover / petrol cap surround centre fairing for QT-9. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Lower left side fairing in silver. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Silver coloured headlight surround fairing. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Lower front cover fairing in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Dowel pin set for 50cc GY6 engines Delivery contains: 6x dowel pins for M7 (cylinder, cylinder head) 6x dowel pins for M6 (engine cases, crankcase ...

Low-cost, standard brake shoes. Supplied with a set of new shoe springs. Size: 110x25mm Generally for rear brake use, but can be used for front on ...

Fully floating axle with bolt and sleeve for front wheels. Axle length: 215mm, diameter: 10mm. Please check required axle length before ordering, a...

Rubber bushes for engines mounts on GY6 139QMB/QMA engines.

Complete two-person seat unit, blackSuitable for most Chinese-built 125/150cc 4-stroke scooters with GY6 engines. Please see product image to avoid...

Well priced 3 shoe replacement clutch in OEM-quality.

Complete air filter element [type 2] with flat air filter for 125/150cc Chinese GY6 4-stroke scooters. As there are so many variations to this scoo...

Complete braking system with level and rear brake light switch for 125/150cc Chinese 4-stroke scooters with rear drum brakes. The fitting has a thr...

PRO-X is the most cost-effective shock in the YSS range. Double-action damping system with adjustable spring preload (tool included). Progressive d...

Malossi strengthened counterpressure springs for rear Malossi convertors, Peugeot Type. Counterpressure springs place the drive belt under tension,...

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

SLS Exhaust system gasket - 130QMB/A

SLS [secondary air system] gasket - 139QMB/A

Cylinder base gasket - GY6 50cc

Crankcase cover gasket [10”-669mm] - GY6 50cc

Exhaust system with SLS connector in OEM quality. Only for vehicles with a factory-fitted SLS (see image 2).

Brake pad set for single piston callipers on Chinese-built 50/125/150cc 4-stroke machines. Unfortunately there is no information regarding which pa...

The oil plug also measures the oil level and there is a measuring gauge on the dip stick, attached to the underside of the plug. Check item to be r...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...

Complete wheel-mounted speedo drive for 125/150cc 4-stroke Chinese-built scooters. As there are various types of drive fitted to these machines, pl...

Starter motor for GY6 125/150cc, supplied with connector cable.

Complete air filter box for 125/150cc Chinese GY6 4-stroke scooters. As there are so many variations to this scooter, please check the product phot...

Rear brake calliper, incl. brake pads. Suitable for vehicles with rear disc brakes.

As original kick-start shaft. A defective shaft is often the cause of sticking kick-starts, or noises when starting.

Plastic fan wheel for variators on GY6 50cc 139QMB/QMA engines. Belt damage is caused by too much heat in the drive area. For this reason, the fan ...

Complete speedo cable for GY6 125/150cc Chinese-built 4-stroke scooters. Length: 96cm. For added assurance, please check the original against the p...

This brake cylinder assembly is suitable for 125 and 150cc GY6 4-stroke Chinese-built scooters with rear brake discs. Supplied complete with hand l...

Naraku racing CDI for improved performance and speed. Simply swap for the original unit. You can get rid of your restricted factory-fitted CDI. Att...

O-ring for isolators and intake manifolds. The isolator sits between the carb and the intake manifold and often causes poor engine running as a res...

This bush sits in the crankcase cover and carries the kickstarter shaft. It can quickly become worn and cause kickstarter issues and, in extreme ca...

Complete, pre-assembled clutch unit consisting of a rear converter torque driver, torque spring, clutch housing and clutch shoes. A defective clutc...

Throttle cable for 125/150cc 4-stroke Chinese-built scooters. The throttle cable has a length of 212cm and fits almost every 125cc and 150cc model....

NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The pisto...

Complete tail light bulbs included. E-certificate. Suitable for all Chinese-built 4-stroke vehicles with vehicle design like the Rex RS450, Baotian...

Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean.

Fan cover for 50cc GY6 139QMB/QMA engines. Includes a cover cap with hole for checking the ignition timing.

This isolator sits between the intake manifold and the cylinder head and can often cause poor revving and engine running when it no longer seals pr...