Baja

CDI attachment rubber for ignition boxes 37x22mm on 4-stroke Chinese-built scooters.

Rotor/magnet wheel for alternators. Alternators are currently available with 6 or 8 coils. Please check your original item to check which one you r...

Complete engine gasket set for 125/150cc GY6 engines (152QMI). Contains all relevant gaskets. Cheaper than individual purchasing. Does not include ...

The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged...

15mm gudgeon pin circlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend o...

Variator back plate for GY6 125/150cc 4-stroke Chinese-built engines. This component corresponds to 100% of the original. Only for 15 mm tail shaft!

Complete left-hand fork leg for 125/150cc GY6 Chinese-built scooters. Ready to install. Stanchion tube diameter: 30mm, Length: 485mm Please careful...

Complete left-hand fork leg [brake calliper side] for 125/150cc GY6 Chinese-built scooters. Ready to install. Stanchion tube diameter: 30mm, Length...

Complete left-hand fork leg [brake calliper side] for 125/150cc GY6 Chinese-built scooters. Ready to install. Stanchion tube diameter: 30mm, Length...

Vacuum-operated fuel tap for various Kymco and SYM scooters. Securing nut thread: M16x1.5mm Only for scooters with metal fuel tanks!!! OEM-quality.

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Exhaust heat guard. Often becomes damaged in a spill and changing it will refresh the look of your machine. Delivery is for 1 head guard in black.

Counterpressure spring mounting tool for convertor units 125-155mm outer diameter.

Malossi Racing clutch spring set. Springs suitable for various Maxi scooters with original 3 shoe clutches from 125-200cc. Set comprises 3 differen...

Wheel-mounted speedo drive for speedo cables with two spokes, retainer nut and square drive. The speedo cable is suitable for Chinese-built 4-strok...

Fan Wheel for air cooling. This item sits on the alternator rotor and is attached with 4 screws.

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 835x20x30

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Size: 743-18-20

NARAKU sports variator for GY6 and 50cc Kymco 4-stroke engines as well as tuned Kymco/ SYM s-stroke engines. When calibrated, this variator provide...

JM-Technics high-quality, maintenance-free batteries with GEL technology. Outstanding OEM-quality for a reasonable price. High-tech GEL batteries h...

Crankcase cover gasket [13”-788mm] - GY6 50cc

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

This piston ring set for 90cc GY6 cylinders (52.4mm bore) is specially manufactured for the 90cc Naraku 4-stroke cylinder (NK100.52).

OEM-quality valve stem oil seal made by Taiwanese and Japanese manufacturers. Naraku offers a set of 2 valve seals for 4-stroke cylinder heads. Exc...

This piston ring set for 50cc GY6 cylinders (39mm bore) can be optionally used in Naraku 4-stroke cylinders, but is also suitable for original cyli...

Dowel pin set for 125/150cc GY6 engines. Delivery contains: 6x dowel pins for M8 and 8x dowel pins for M6.

Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm...

Current Naraku counterpressure springs with different alloying of the spring steel. A necessary addition where engines have been tuned. RPM increas...

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Great value...

Replacement right-hand mirror in original design with E-certification for Benelli, Generic, Vespa and Keeway Scooters. Cheaper alternative to expen...

Replacement right-hand mirror in original design with E-certification for various Benelli, Generic, Vespa and Keeway scooters. Cheaper alternative ...

Replacement left-hand mirror in original design with E-certification for various Benelli, Generic, Vespa and Keeway vehicles. Cheaper alternative t...

Replacement speedo cable in original dimensions for Aerox and Nitro from 2003 and Suzuki Katana. Design and dual-side mounts match the original sco...

Replacement speedo cable in original dimensions for Keeway and Suzuki scooters and motorcycles. Design and dual-side mounts match the original spee...

Rear centre strip fairing in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Lower right side fairing in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Under seat storage / helmet compartment in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Upper right side fairing in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Upper left side fairing in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Floor panel / floor board in black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Black headlight surround fairing. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Upper front cover fairing in Black. PLEASE NOTE THIS PART DOES NOT FIT THE PEUGEOT V-CLIC.

Naraku Crossover exhaust silencer.

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

Complete replacement engine for Chinese-built 4-stroke scooters with 12” wheels. As a result of the time saved, at times replacing the entire eng...

Complete replacement engine for Chinese-built 4-stroke scooters with 10” wheels (3.5x10 / 3.00x10 / 90/90-10 etc.). As a result of the time saved...