Baotian

Cylinder head nut with M7 thread for all Minarelli and Minarelli-based engines, as well as other models with M7 threads on the cylinder stud bolts.

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...

Telescopic fork for CPI, Oliver, Hussar and Popcorn as well as Keeway Focus, Fact and more. Also suitable for many Chinese-built 2-stroke scooters....

Locking spring for kick-starter carrier sprockets.

Kickstart gear for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Recoil spring for kickstarter levers on CPI, Keeway, Generic and Minarelli-based Chinese-built 2-stroke engines.

Aftermarket oil pump in original design and flow. A defective oil filter can cause seizing, or damage the crank and bearings. Such a small part mak...

Great price cylinder kit for horizontal air-cooled Minarelli engines. The cylinder kit is identical in size and performance to the original, making...

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/52 teeth.

Gearbox input shaft. This is where the clutch is mounted. 13 teeth as per original item.

Replacement cylinder kit for Minarelli-based, air-cooled Chinese-built engines (Euro2 till 2003) e.g.: CPI, Keeway etc. Great price! The cylinder k...

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension...

Complete alternator for Minarelli-based 2-stroke engines. Suitable for Keeway, CPI, Generic, Longjia, Mawi etc. There are currently 4 different ver...

Bolt and nut set for Chinese-built 2-stroke scooters, Keeway etc. with almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering ind...

Vacuum-operated fuel tap for various Kymco and SYM scooters. Securing nut thread: M16x1.5mm Only for scooters with metal fuel tanks!!! OEM-quality.

Exhaust heat guard. Often becomes damaged in a spill and changing it will refresh the look of your machine. Delivery is for 1 head guard in black.

Wheel-mounted speedo drive for speedo cables with two spokes, retainer nut and square drive. The speedo cable is suitable for Chinese-built 4-strok...

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on 70cc Naraku 2-stroke cy...

Piston ring set for 70cc Naraku cylinder kit for 1E40QMB engines with 12mm gudgeon pin.

Very high quality Malossi crank for 12mm gudgeon pins. Typical Malossi high quality. Full cheek design for higher pre-compression, for max fill and...

Malossi 50CC MHR Cylinder kit. One of the strongest with 50cc capacity, set up for 10mm gudgeon pins. 6 over flow ports and 3-piece outlet port. Ti...