Baotian

Replacement drive belt suitable for scooter with 12 or 13” wheels. Mostly used on 12” wheel vehicles with rear brake disc. On 13” models it i...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and...

Aluminum Kickstarter [Light] in carbon look suitable for Minarelli and Peugeot engines.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

Brake light switch for rear disc brakes on GY6 50/125/150cc Chinese-built scooters with rear disc brakes.

Repair kit for Chinese GY6 139QMB/QMA original carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idl...

Variator back plate.

Base washer for kick-start spindle. Mounts on the outside of the crankcase cover and sits under the circlip.

Kickstarter retaining circlip.

Carrier sprocket for the variator v-belt pulley fan. The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of ...

Front outer v-belt pulley. Suitable for GY6 139QMB/QMA engines, Kymco 4-stroke engines and Kymco models with horizontal cylinders. Outside diameter...

This plastic spacer prevents the kickstarter spring from rubbing against the crankcase cover, making it easier to turn over.

Kickstarter recoil spring.

Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.

Oil strainer 50cc GY6 139QMB/QMA engines and 125/150cc GY6 152/157QMI.

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Suitable for 139Q...

Oil strainer spring for all 50cc GY6 139QMB/QMA 4-stroke engines and 125/150cc 152/157QMI.

Carburettor membrane with slide and adjustable carb needle. Various CVK carbs of the same basic construction are installed on 4-stroke vehicles. Th...

Baotian ignition system for approx. 30mph restricted vehicles. Road legal. Not suitable for derestricting vehicles as no Vehicle Type Approval. Att...

Kickstart pinion gear clip for GY6 50cc 139QMB/QMA

Kick-start sprocket with very strong teeth to deal with heavy loads, as they transfer the power from the kick-start to the crank. Many starting iss...

Complete timing chain tensioner for 50cc GY6 4-stroke engines. Tensioner gasket not included and should be ordered separately.

Malossi BigBore cylinder with 52mm bore in aluminium with hard chromed liner. The bore = 87.9cc capacity. Original head may be retained according t...

Of Tecnigas we have a very nice chrome exhaust processed in sport optics in the delivery program. A visual treat with 2-stroke look. Performance-wi...

CNC-machined replacement piston for 52.4mm Naraku cylinder with molybdenum coating. Comes complete with piston rings, oil scraper rings, gudgeon pi...

Complete cylinder gasket set for all 51mm and 52.4mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is ...

Complete cylinder gasket set for all 44mm Naraku or 44mm Chinese-built 4-stroke cylinder sets.

With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. As a 4 stroke cylinder is effectively just a hole, the e...

With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. The bore has been taken out to 52.4mm. The external diam...

Rubber thrust bearing for engine mounts. This version mounts to the flat thrust bearing on the mount.

Complete airbox. Contains airbox, air filter element and connector hose with a connector ring for the carburettor. Suitable for all Chinese 4-strok...

Wheel-mounted speedo drive for speedo cables with two spokes, retainer nut and square drive. The speedo cable is suitable for Chinese-built 4-strok...

Wheel-mounted speedometer drive for speedo cables with side screw attachment and slotted drive. As there are various types of drive fitted to these...

Gudgeon pin for 47mm GY6 cylinders.

Complete original quality aftermarket 47mm piston for 72cc cylinders. Delivery as shown. Includes gudgeon pin, piston, piston rings, oil scraper ri...

Piston for 50cc 39mm cylinders. Delivery as shown and includes gudgeon pin, piston, piston rings, oil scraper rings and gudgeon pin circlips.

Brake light switch for front brake discs. Suitable for GY6 50/125/150cc Chinese-built scooters.

Float bearing pin.

Screw for air cut-off valve and choke plate.

Screw for plastic carburettor cap with collar.

Carburettor slide spring.

Float needle valve.

Metal float bowl with accelerator pump. Suitable for all original and Naraku NK200.01 carbs for GY6 50cc engines 129 QMB/QMA.

Standard Naraku carburettor floats for GY6 50cc 139 QMB/QMA.