Beeline

Complete, pre-assembled clutch unit consisting of a rear converter torque driver, torque spring, clutch housing and clutch shoes. A defective clutc...

Throttle cable for 125/150cc 4-stroke Chinese-built scooters. The throttle cable has a length of 212cm and fits almost every 125cc and 150cc model....

Naraku racing CDI for all CPI, Keeway, Longjia, Generic and Minarelli-based Chinese-built engines with a double connector. Simply swap for the orig...

NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The pisto...

Plastic fan wheel air cooling for CPI, Keeway, Generic, Mawi, Longija and other Chinese-built 2-stroke engines.

Little end bearings for Minarelli/Morini engines with 10mm gudgeon pins.

Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean.

Fan cover for 50cc GY6 139QMB/QMA engines. Includes a cover cap with hole for checking the ignition timing.

This isolator sits between the intake manifold and the cylinder head and can often cause poor revving and engine running when it no longer seals pr...

Wedge for positioning the alternator rotor on the crankshaft. lenght=13mm, wide=3mm, high=2,5mm

Kevlar belt from Polini. The most durable v-belt Polini offers has additional aramid fibre inlays that make this belt extremely resistant to tearin...

Polini Speed Clutch Bell. Better design than most original clutches and thus an ideal replacement for died down or misshapen originals. The improve...

Tuned engines generally develop their power higher in the rev range and the engine can lose performance at lower revs, meaning poor drive. To comba...

Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. K...

Polini EVO II Speed Bell is lighter and more revvy than the previous model. The single-piece clutch bell is CNC-machined from a single block, unlik...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

Set of 3 replacement sliding shoes for variator plates.

Original CDI unit for vehicles with a double connector in the CDI as factory-fitted. For assurance, please check the image for comparison. Also sui...

Alternator with cable connector/plug and Pick-up sensor. There are currently 2 different versions of this alternator. The difference is the insulat...

Complete steering bearing kit for some low-cost and Chinese-built scooters, incl. shells, ball races and locking nuts.

It is very easy to lose petrol caps! At the petrol station, broken keys or just dropped never to be found again. Instead of buying a new set of key...

Hand brake cylinder with lever and brake light switch for front disc brake systems. Suitable for all standard production handlebars 22mm.

Front steel-braided hoses for disc brakes. Steel braided hoses are brake hoses, surrounded by a woven steel jacket. The advantage over rubber lines...

Brake light switch for drum brakes with cable. The switch sits on the brake fitting. To avoid errors when ordering, please check the product image....

Left-hand handlebar switchgear for scooters with integrated high and low beam, indicator switch and horn. Please check the product image, as variou...

Grip set including throttle sleeve, left and right. These can of course be ordered individually, just select your item from the list below. outer l...

Complete speedo unit. Suitable for vehicles with a body design similar to the Rex RS450, Baotian BT50QT-9, Benzhou City Star etc. For added assuran...

Original brake lever for rear drum brakes (left-hand brake lever). Suitable for all new rear drum brake designs, where the switch element is not in...

NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark star...

Low-cost replacement plug for Chinese-built 4-stroke 50cc engines and all Kymco 50cc 4-stroke engines. Code: CR7HNS, matches NGK CR7HSA or C7HSA. F...

Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engin...

OEM quality without the SLS. For models with a factory-fitted SLS system, this needs to be blanked off. The positive side effect of this: the scoot...

Intake manifold for 24mm Naraku tuning carbs. Delivery includes spacer, clamp and gasket. This intake allows a free airflow through a 24mm carb, al...

Chrome flywheel fan cover for the 139QMA/QMB 50cc 4 stroke engines. This product is a nice upgrade or replacement for any broken cover.

Tecnigas Silent Pro exhaust system for 4 stroke engines. Fits all 50cc GY6 4-stroke scooters with 12 or 13 inch wheels. The manufacturer provides t...

Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engin...

Channelled sheet foot board in aluminium. Fitted in the same way as the “speed” with the supplied bolts. Suitable for all Chinese-built 4-strok...

Complete cylinder gasket set for all 47mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is exactly sui...

NARAKU Racing intake manifold for GY6 and all GY6-based models, as well as Honda Monkey and Monkey replica engines. The intake manifold has a passa...

Reinforced Malossi MHR torque spring (White) for Minarelli engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Starter motor, suitable for all Chinese-built 4-stroke engines. This item can be used without a problem, even where the originally fitted item has ...

Polini Hi-Speed now available in a 4-stroke version set! Hi-Speed stands for better drive and smoother shifting. Supplied as shown with one set of ...

Malossi Multivar variator for great drive and shifting, as well as increased top end. [computer-optimized running surface] Now available for Chines...

High-quality, but cost-effective aftermarket piston for original cylinders from Italian piston specialists Meteor. The set contains a piston, gudge...

Having a large intake manifold makes little difference without the correct reed block. This low-cost racing reed block makes for a clear path and g...