Beeline

The latest version of the Polini Evolution clutch. The 3G ForRace now has 3 clutch blocks for more powerful action. Adjusting the clutch engagement...

Grip set (right and left) including right-hand throttle sleeve and rubber. Both grips have chromed end pieces and stops. This is ideal for customiz...

Standard Chinese-built-made spark plug as originally factory-fitted. Matches NGK CR7HSA.

OEM quality small end bearing (10x14x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Non-locking petrol cap for vehicles with the fuel tank under the seat. This petrol cap is generally locked or unlocked with a half rotation. Delive...

Dellorto 17.5 mm carburettor. For scooters with Minarelli or Minarelli-based engines. Recommended even for untuned engines, as the carburettor is e...

Malossi back plate for Minarelli The result is clean shifting and low loss of power, For tuned and original scooters.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Crankcase cover gasket [12”-729mm] - GY6 50cc

Naraku AC unrestricted Racing CDI with with improved/advanced mapping for GY6 50/125/150cc 4-stroke Chinese vehicles. Attention: NOT for REX, Qingq...

Small but great-looking coloured oil filler bolts in blue, red or gold. 1x blue bolt of the required size supplied with relevant O-ring.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines.

Pressure-activated petrol tap for 50cc Chinese scooters with plastic tanks (e.g. New models of the Rex RS and Peugeot V-Clic) and most Chinese 4-st...

NARAKU performance quality piston set. Suitable for all GY6 50cc cylinders [39mm bore]. The NARAKU piston has a molybdenum coating to reduce wear a...

Indicator relays for 125/150cc GY6 4-stroke Chinese-built scooters. 3-pin plug.

Starter relay or starter solenoid for 125/150cc GY6 4-stroke Chinese-built scooters. 2-pin connector.

Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm The current version of the Naraku counter pressure spring uses a modified alloy sprin...

Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm The current version of the Naraku counter pressure spring uses a modified alloy sprin...

Front steel-braided hoses for disc brakes. Steel braided hoses are brake hoses, surrounded by a woven steel jacket. The advantage over rubber lines...

CNC-machined aluminium intake manifold spacer from NARAKU. The Naraku Jet Flow spacer is designed to optimize flow in NARAKU 51mm cylinder heads. T...

Folding black kickstarter. Low-cost replacement for Minarelli engines with horizontal cylinderss and Chinese-built 2-stroke Minarelli-based engines...

Right-hand scooter switch gear with integrated light switch and E-starter, for models with front drum brake. Chinese-built 4-stroke scooters are mo...

Left-hand handlebar switchgear for scooters with integrated high and low beam, indicator switch and horn. Please check the product image, as variou...

Replacement intake manifold for all GY6 50cc 139QMB/QMA 4 stroke engines to original OEM standards. Supplied with clamp and O-ring.

Float bowl screw with locking ring.

Adjustable carburettor needle with clip.

Bolt and nut set for GY6 50cc 139QMB/QMA engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual ...

Outer variator pulley from NARAKU. The pulley corresponds to the shape and dimensions of the original. A cost-effective alternative when pulleys ar...

The rectifier/controller changes the voltage from the alternator into the DC for the on board computer, 12V, and keeps the voltage within a certain...

Foam air filter element suitable for changing at service intervals. The filter fits in the original airbox

Right-hand scooter switch gear with integrated light switch and E-starter. Please check the product image against the original part to be sure, as ...

Right handlebar grip. outer length: 115mm inner length: 112mm throttle type: throttle twist grip

Original brake lever for front brake discs in chrome. Suitable for all front disc brake designs. For added assurance, please check the image and co...

Original brake lever for front brake discs Suitable for all front disc brake designs. For added assurance, please check the image and compare with ...

High-torque 70cc NARAKU cylinder kit. This cylinder kit is not designed to be revvy, but rather it shows its strengths in the lower range. Just abo...

Complete cylinder gasket set for all 39mm Naraku or original 4-stroke cylinder sets. Kit contains all necessary gaskets from the cylinder base up a...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...