Benelli

The Heidenau K59 Reinforced is a well-engineered, long-lasting all-weather tyre with great traction in the wet. The profile blocks have been arrang...

Shaft oil seal Internal diameter: 20mm, External diameter: 42mm, Thickness/Depth: 8/9mm

Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of th...

Complete set of quality crank oil seals from Naraku, for scooters with Chinese-built, Minarelli-based 2-stroke engine (engine code 1E40QMB). Set co...

24mm connector boot for Arreche carbs with clamping flange.

23mm connector boot for Arreche carbs with clamping flange.

Reinforced starter motor freewheel without starter sprocket, from Naraku. The starter mechanism is subjected to higher loading where engines have h...

Polini reinforced transmission cover, ideal for tuning above 70cc. The standard cover allows the gearshaft to sit in a recess and is only lubricate...

Replacement oil pump drive gear for scooters with Minarelli-based 2-stroke Chinese-built engines and Minarelli 50cc 2-stroke AC/LC engines.

NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best b...

Cylinder head gasket for horizontal air-cooled Minarelli and 1E40QMB engines.

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Well priced racing clutch with lighter clutch shoes. Weight saving means engagement at higher revs. Harder clutch springs. A lower quality sports c...

Replacement taillight glass for various scooters and motorcycles from Cagiva, Italjet, Rieju, Voxan, MBK and Yamaha. The glass is consistent with t...

Replacement clutch bell for lightly-tuned engines. Matches the dimensions of the original (107mm). Cheapest clutch we offer, but definitely worth t...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Aluminium-machined height adjuster set. 37mm, two fitment holes, allows for great adjustability and gives a sporty position. A must for styling fan...

Transparent coolant hose with 15mm internal diameter, 1m in length. 15mm coolant hoses are often used on scooters and mopeds with Minarelli engines...

3 Set of sliders for the Naraku HS and HS-Racing variators for scooters with Minarelli and CPI engines.

Aluminium kickstarter Light suitable for Minarelli and Peugeot engines. Titanium colour.

Easy to tune variator from Top Racing. The variator can be used with original belt. Supplied with unrestricted vario sleeve and 3 sets high quality...

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Self-locking nut M14x1.50mm for rear wheel shaft (central nut for rear wheel). Also for other Minarelli engines and other models with M14x1.50mm th...

Complete engine gasket set for horizontal Minarelli AC and LC engines. This gasket set contains all the relevant engine gaskets for air- and water-...

Complete starter clutch. The counter piece of the electrical starter is responsible for uncoupling the starter once the engine is running. If this ...

Complete shaft seals for Minarelli engines. Contains 6 seals incl. 2x shaft seals for the rear convertor.

Gearbox output shaft incl. sprocket for 50cc Chinese-built 2-stroke, CPI and Keeway scooters. 44 tooth as per original. shaft and sprocket are read...

Magneto rotor for Minarelli-based 2-stroke engines. Also suitable for, among others, Keeway, CPI Generic, Longjia, Mawi etc. There are currently 3 ...

Cylinder gasket set for 50cc air-cooled Minarelli engines. Suitable for original and aftermarket 50cc cylinders.

Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all hor...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

Replacement cylinder head for 50cc Morini AC cylinders. This cylinder head is manufactured to, and meets, OEM standards and quality of the vehicle ...

High-quality replacement piston for the 70cc original and 70cc NARAKU cylinder kits for Minarelli 1E40QMB engines with 12mm gudgeon pin. Delivered ...

Standard brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 130x28mm. For rear brake use. Also su...

High-quality Bando V/S belt, durable and well-engineered. Size: 758-17.5-28 Suitable for all vehicles with 100cc 2-stroke Minarelli engines.

Tecnigas Silent Pro high-torque exhaust in a subtle design. Provides good increase in top end speed. Great choice for those who need a new exhaust ...

Counterpressure spring mounting tool for convertor units up to 125mm outer diameter.

Malossi Multivar 2000 “maxi-torque” converter for larger capacity machines. Sinter metal, self-lubricating anti-friction bush with coated-steel...

High Quality Racing full circle crankshaft from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshaf...

The RS-II Racing Exhaust from Tecnigas is a further development of the familiar RS70 system. The silencer is now standard anodized grey. The diamet...

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.31). Delivered as shown with piston rings, gudgeon pin and circ...

Cylinder gasket set for all 50 and 70cc sports cylinder kits from Malossi for horizontal Minarelli AC engines.

Standard Bosch spark plug. This spark plug matches the heat value and construction of the original.

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...