BT49QT-11 Retro

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

E-choke mounting plate.

Gasket for vehicles not fitted with a round exhaust manifold gasket. This is a universal gasket for all flat exhaust manifolds. Solid design and a ...

39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.

Left-hand handlebar switchgear for scooters with integrated high and low beam, indicator switch and horn. Please check the product image, as variou...

Complete aftermarket carburettor for 4-stroke scooters, with choke. The carburettor is factory-fitted on all 50cc 4-stroke Kymco scooters and many ...

Complete 19mm aftermarket carburettor (membrane type) with E-choke and jetting. Ready to mount; suitable for 50 and 80cc 4-stroke engines. This is ...

Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm &...

Valve cover gasket [rubber] - GY6 50ccm

Original brake lever for rear brake discs (left-hand brake lever). Suitable for all rear disc brake lever fittings. For added assurance, please che...

Throttle cable to fit most 4-stroke Chinese-built scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many o...

Rubber float bowl gasket for all original and Naraku NK200.01 carbs for GY6 50cc engines 1239 QMB/QMA.

Throttle cable to fit most Chinese-built 4-stroke scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many o...

Brake shoe set with ribbed surface. The ribbed section prevents the over-accumulation of brake dust deposits, which generally lead to glazing and a...

Spark plug connector for all GY6 engines, 50-180cc.

Original brake lever for rear drum brakes (left-hand brake lever). Suitable for all new rear drum brake designs, where the switch element is not in...

Speedo cable with retainer nut on upper and lower end for 2005 models on. Please check the original item against the product image. We offer 3 spee...

Alternator with cable connector/plug and Pick-up sensor. These alternators are currently available in 2 different versions. The difference is the i...

CDI attachment rubber for ignition boxes 42x23mm on 4-stroke Chinese-built scooters.

Grip set (right and left) including right-hand throttle sleeve and rubber. Both grips have chromed end pieces and stops. This is ideal for customiz...

Standard Chinese-built-made spark plug as originally factory-fitted. Matches NGK CR7HSA.

Non-locking petrol cap for vehicles with the fuel tank under the seat. This petrol cap is generally locked or unlocked with a half rotation. Delive...

Crankcase cover gasket [12”-729mm] - GY6 50cc

Brake pad set for double-piston callipers on Chinese-built 50/125/150cc 4-stroke machines. Unfortunately there is no information regarding which pa...

Pressure-activated petrol tap for 50cc Chinese scooters with plastic tanks (e.g. New models of the Rex RS and Peugeot V-Clic) and most Chinese 4-st...

Front steel-braided hoses for disc brakes. Steel braided hoses are brake hoses, surrounded by a woven steel jacket. The advantage over rubber lines...

Right-hand scooter switch gear with integrated light switch and E-starter, for models with front drum brake. Chinese-built 4-stroke scooters are mo...

Left-hand handlebar switchgear for scooters with integrated high and low beam, indicator switch and horn. Please check the product image, as variou...

Replacement intake manifold for all GY6 50cc 139QMB/QMA 4 stroke engines to original OEM standards. Supplied with clamp and O-ring.

Float bowl screw with locking ring.

Adjustable carburettor needle with clip.

Bolt and nut set for GY6 50cc 139QMB/QMA engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual ...

The rectifier/controller changes the voltage from the alternator into the DC for the on board computer, 12V, and keeps the voltage within a certain...

Complete airbox. Contains airbox, air filter element and connector hose with a connector ring for the carburettor. Suitable for all Chinese 4-strok...

Foam air filter element suitable for changing at service intervals. The filter fits in the original airbox

Right-hand scooter switch gear with integrated light switch and E-starter. Please check the product image against the original part to be sure, as ...

Right handlebar grip. outer length: 115mm inner length: 112mm throttle type: throttle twist grip

Original brake lever for front brake discs in chrome. Suitable for all front disc brake designs. For added assurance, please check the image and co...

Original brake lever for front brake discs Suitable for all front disc brake designs. For added assurance, please check the image and compare with ...

Kick-start sprocket with very strong teeth to deal with heavy loads, as they transfer the power from the kick-start to the crank. Many starting iss...

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Replacement motor bearings for scooters with 50-150cc GY6 engines and Kymco scooters with 2- and 4-stroke engines. Dimensions (Internal x External ...

Dowel pin set for 50cc GY6 engines Delivery contains: 6x dowel pins for M7 (cylinder, cylinder head) 6x dowel pins for M6 (engine cases, crankcase ...

Low-cost, standard brake shoes. Supplied with a set of new shoe springs. Size: 110x25mm Generally for rear brake use, but can be used for front on ...