Bultaco

6204 C3 bearing. Internal diameter 20mm, external diameter 47mm, thickness 14mm.

Great quality Naraku crank for geared mopeds with Derbi EBE (kick-start) and EBS (E-Start) engines. Corresponds to the original crankshaft dimensio...

Low-cost intake manifold for derestricting the Derbi D50B0, EBE or EBS engines. The opening is increased to 23mm. Required where a larger carburett...

Cylinder studs incl. M7 threaded nuts for securing the cylinder. Set of 4 studs and nuts, 120mm in length, nuts are 19mm. Suitable for EBE and EBS ...

Shaft oil seal Internal diameter: 20mm External diameter: 35mm Thickness/Depth: 7mm

Shaft oil seal Internal diameter: 12mm External diameter: 20mm Thickness/Depth: 5mm

Arreche 23.5mm sealing ring for carbs with threaded flange.

Arreche 25mm sealing ring for carbs with threaded flange.

Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the ex...

Replacement reed block with plastic reeds. Rather than the usual metal reeds, this item uses plastic reeds. Metal membrane petals can cause massive...

Low-cost intake manifold for derestricting the Derbi D50B0, EBE or EBS engines. The opening is increased to 23mm. Required where a larger carburett...

Good price replacement gear lever for various geared mopeds with Derbi EBE or D50B0 engines.

Low-cost and solid racing carburettor from Arreche with 21mm inlet. Supplied with basic tune with additional main jet. Jets may need to be changed ...

Licenced replica of the English Amal carburettor from Arreche, 19mm. Supplied with additional larger main jet. Fits the original intake manifold. C...

Licenced replica of the English Amal carburettor from Arreche, 17.5mm. Supplied with additional larger main jet. Fits the original intake manifold....

Low-cost and robust Arreche 16mm carburettor for tuning or original replacement. Basic tune with larger jet. Original airbox may be retained depend...

Replacement gear lever for various geared mopeds with Derbi EBE or D50B0 engines.

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...

Alternator rotor puller. Required for working on the alternator or parts under it and on crank bearings. Pressure bolt screws into the rotor and te...

Replacement LED taillight in with white glass for various CPI, Derbi, MH and Rieju scooters or geared mopeds. Matches the dimensions of the origina...

High Quality Racing full circle crankshaft from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshaf...

Crankshaft in High Quality from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshafts. Advanced pro...

Innertube with straight valve for off-road or enduro bikes with 18 inch tyres. Suitable for: 3.50-18 4.00-18 120/70-18 120/80-18 120/90-18 120/100-...

Innertube with straight valve for off-road or enduro bikes with 21 inch tyres. Suitable for: 2.75-21 3.00-21 80/90-21 80/100-21 90/90-21 Tip: Alway...

Naraku small end bearing [HD-Quality] - 12x15x15. Suitable for Minarelli AM, Derbi EBE, EBS, D50B0, Peugeot engines.

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for EBE/EBS engines. Delivery as shown, including: piston rings, gudgeo...

Top quality cylinder kit by Naraku. Extra special attention has been paid to the piston quality. The Naraku piston is molybdenum-coated, which prot...

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single lever i...

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single brake l...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

These cylinder gasket sets contain all the necessary gaskets from the base gasket upwards, and can be optionally used on original cylinders and sta...

Airsal cylinder head 88cc [Xtreme 45mm] - EBE / EBS

Airsal piston kit 88cc [Xtreme 45mm] - EBE / EBS

Airsal cylinder gasket set 88cc [Xtreme 45mm] - EBE / EBS

Airsal 88.3cc is the largest and most powerful big bore kit available for the 50cc 2-stroke market. Top quality with Vertex pistons and serious pow...

Replacement mirror in original design with E-certification for Derbi Senda, Savannah - Bultaco: Lobito, Astro as well as Gilera RCR 50 and SMT 50 g...

Optical tuning with colour coordinated gear. Finish the look off with a matching kick-starter lever. Lever supplied in anodized red.

Optical tuning with colour coordinated gear levers. Finish the look off with a matching kick-starter lever. Carbon-look lever supplied.

Chrome-coloured kick-starter in standard design for Derbi EBE and D50B0 engines.

Black kick-starter in standard design for Derbi EBE, EBS and D50B0 engines.

Optical fine tuning requires fine details like a coloured kick-starter lever in orange, blue, red and carbon-look. Great engine accent. Anodized or...

Optical fine tuning requires fine details like a coloured kick-starter lever. Great engine accent. Blue anodized kick-starter lever supplied

Optical fine tuning requires fine details like a coloured kick-starter lever. Great engine accent. carbon-look kick-starter lever supplied

Replacement chain link joint for KMC 420 (gold).

Replacement chain with 130 links (165cm). Must be cut to length. Supplied with clip link joint.

Replacement speedo cable in original dimensions for Derbi Senda R from 99. Design and dual-side mounts match the original speedo cable. Length from...

For the 88cc Big Bore cylinder kit from the Airsal Xtreme series, Airsal offers this 45mm bore crank. 45mm bore means the crankcases need to be alt...