Carburator Accessories

Aluminium boost bottle with solid vacuum chamber. Guides mixture through the boost bottle rather than back through the carb on closed throttle. A k...

High quality fuel filter with orange-coloured paper filter element, round in shape. Impurities in fuel can lead to jets clogging up, which in turn ...

Universal oil / vacuum chloroprene rubber hose. Highly resistant against brittling and weather, fuel etc. 1m, black, internal diameter: 2.5mm

320mm long choke cable for converting scooters with Arreche or Mikuni carbs with manual chokes. Installation requires a small hole to be drilled in...

150mm choke cable for converting scooters with Arreche or Mikuni carbs with manual chokes. Installation requires a small hole to be drilled in the ...

150mm choke cable for converting scooters with Arreche or Mikuni carbs with E-chokes. Installation requires a small hole to be drilled in the fairi...

Main jet made by 101 Octane suitable for carburetor construction type PWK of the manufactures Keihin, OKO, KOSO, NARAKU, Stage6 R/T, Vicma and much...

Main jet made by 101 Octane suitable for carburetor construction type PWK of the manufactures Keihin, OKO, KOSO, NARAKU, Stage6 R/T, Vicma and much...

Main jet made by 101 Octane suitable for carburetor construction type PWK of the manufactures Keihin, OKO, KOSO, NARAKU, Stage6 R/T, Vicma and much...

Main jet made by 101 Octane suitable for carburetor construction type PWK of the manufactures Keihin, OKO, KOSO, NARAKU, Stage6 R/T, Vicma and much...

Main jet made by 101 Octane suitable for carburetor construction type PWK of the manufactures Keihin, OKO, KOSO, NARAKU, Stage6 R/T, Vicma and much...

Manual choke lever for Dellorto carburettors. Stress-free mounting directly to the carb. Not for all carbs, as some are less easily accessed. On mo...

Dellorto pilot jets for 19-21mm PHBG - PHBD carburettors. The pilot jets are responsible for the mixture at low revs. Problems can occur if the ite...

Dellorto pilot jets for 19-21mm PHBG - PHBD carburettors. The pilot jets are responsible for the mixture at low revs. Problems can occur if the ite...

Dellorto pilot jets for 19-21mm PHBG - PHBD carburettors. The pilot jets are responsible for the mixture at low revs. Problems can occur if the ite...

Dellorto pilot jets for 19-21mm PHBG - PHBD carburettors. The pilot jets are responsible for the mixture at low revs. Problems can occur if the ite...

Dellorto pilot jets for 19-21mm PHBG - PHBD carburettors. The pilot jets are responsible for the mixture at low revs. Problems can occur if the ite...

Dellorto pilot jets for 19-21mm PHBG - PHBD carburettors. The pilot jets are responsible for the mixture at low revs. Problems can occur if the ite...

37mm air filter adapter from Arreche with threaded air filter connection.

Replacement threaded-type carb cap, aluminium, for Arreche 24mm competition carbs.

Carb cap with 135° throttle cable guide for Arreche carbs.

Carb cap with 63mm long 90° throttle cable guide / throttle cable adjuster for Arreche carbs.

Carburettor cap with 60mm long 90° throttle cable guide / throttle cable adjuster for Arreche carbs.

Carburettor cap with 48mm long, 90° throttle cable bend / throttle cable adjuster for Arreche carbs.

Carb cap with 41mm long 90° throttle cable guide / throttle cable adjuster for Arreche carbs.

Carb cap with 135° throttle cable guide for Arreche carbs.

Replacement carb cap, aluminium, for Arreche 24mm competition carbs.

Replacement carb spring for all Arreche carburettors.

Replacement carb cap, aluminium, for Arreche 24mm competition carbs.

Replacement carb needle (E2) for 24mm competition carbs from Arreche.

Replacement mixer pipe (103) for the 24mm competition carb from Arreche.

Replacement carb needle (E1) for 24mm competition carbs from Arreche.

Replacement carb slider for the Arreche 24mm competition carb

Air cut-off valve. This valve sits on the side of the carburettor and richens the mixture somewhat to avoid the engine running too lean. Needle is ...

Set of 12 Naraku Gurtner main jets. Comes with 12 jets in 0.02mm increments. Set contains 74-96.

Set of 12 Naraku Gurtner main jets. Comes with 12 jets in 0.02mm increments. Set contains 50-72.

Set of Naraku M6 main jets for Dellorto carburettors. Comes with 10 jets in 0.02mm increments. Set contains 110-128 M5 main jets are generally used...

Set of Naraku M6 main jets for Dellorto carburettors. Comes with 10 jets in 0.02mm increments. Set contains 50-68. M5 main jets are generally used ...

Repair/spare part kit for PWK carburettors made by 101 Octane. Suitable for Keihin PWK carbs, as well as OKO, KOSO, NARAKU, Stage6 R/T and many more.

Set of Naraku M5 main jets for Dellorto carburettors. Comes with 10 jets in 0.02mm increments. Set contains 70-88. M5 main jets are generally used ...

Complete piston set for the manual choke on Arreche carburettors.

Screw-in sleeve for Arreche carbs with manual chokes. Only suitable for Arreche carbs with factory-fitted manual choke.

E-choke for scooters with Mikuni carbs or Chinese Minarelli-based 2-stroke engines e.g. CPI, Keeway, Generic, Mawi, Longija etc.

Arreche carburettor main jet size 220 for all Arreche carbs from 17.5 - 24mm. Generally an increase of 10-15% in the main jet size is a good option...

Arreche carburettor main jet size 210 for all Arreche carbs from 17.5 - 24mm. Generally an increase of 10-15% in the main jet size is a good option...

Arreche carburettor main jet size 200 for all Arreche carbs from 17.5 - 24mm. Generally an increase of 10-15% in the main jet size is a good option...

Arreche carburettor main jet size 190 for all Arreche carbs from 17.5 - 24mm. Generally an increase of 10-15% in the main jet size is a good option...

Arreche carburettor main jet size 185 for all Arreche carbs from 17.5 - 24mm. Generally an increase of 10-15% in the main jet size is a good option...