Carburator Accessories

Main jet made by 101 Octane suitable for carburetor construction type PWK of the manufactures Keihin, OKO, KOSO, NARAKU, Stage6 R/T, Vicma and much...

Main jet made by 101 Octane suitable for carburetor construction type PWK of the manufactures Keihin, OKO, KOSO, NARAKU, Stage6 R/T, Vicma and much...

Main jet made by 101 Octane suitable for carburetor construction type PWK of the manufactures Keihin, OKO, KOSO, NARAKU, Stage6 R/T, Vicma and much...

Main jet made by 101 Octane suitable for carburetor construction type PWK of the manufactures Keihin, OKO, KOSO, NARAKU, Stage6 R/T, Vicma and much...

Many scooters from the middle East use different types of carburettor. The carb is a Mikuni copy, but uses an E-choke/cold start valve. You can onl...

Manual choke lever fitting for Keihin PWK, OKO, NARAKU, Polini CP and Stage6 carburettors.

E-choke in OEM-quality for all 50, 125 and 180ccMatches dimensions and functionality of the original e-choke. Note: Piaggio has fitted Dellorto and...

Universal choke cable for Arreche, Mikuni and PHBG carburettors with threaded manual choke. Check this type is fitted prior to installation. length...

320mm choke cable for converting scooters with Arreche or Mikuni carbs with E-chokes. Installation requires a small hole to be drilled in the fairi...

24mm connector boot for Arreche carbs with clamping flange.

23mm connector boot for Arreche carbs with clamping flange.

Manual choke (button version) for Arreche carbs.

Replacement float bowl for 16-24mm Arreche carbs.

Naraku tuning set for PWK and CVK carburettors. Set includes the following jets: 35 - 38 - 40 - 42 - 45 - 48 - 50 - 52 - 55 - 58.

Set of Naraku M5 main jets for Dellorto carburettors. Comes with 10 jets: 90, 92, 94, 96, 98, 100, 102, 105, 108 and 110. M5 main jets are generall...

Set of Naraku M5 main jets for Dellorto carburettors. Comes with 10 jets in 0.02mm increments. Set contains 50-68. M5 main jets are generally used ...

Arreche pilot jet - size: 40

M5 threaded main jets for 4-stroke original carburettors made by 101 Octane. For 125cc and 150cc 4-stroke GY6 engines, and used on Kymco 50cc Model...

Arreche carb slider (17.5 - 21mm)

Arreche E-choke clamp

Arreche Mix adjuster screw

Arreche mixer pipe / jet pipe

Dellorto carburettor M6 main jet Size 94 for all Dellorto carburettors from 17.5 to 24 mm. When tuning the engine, always install an oversized main...

Dellorto carburettor M6 main jet Size 90 for all Dellorto carburettors from 17.5 to 24 mm. When tuning the engine, always install an oversized main...