CPI

Aluminium kickstarter Light suitable for Minarelli and Peugeot engines. Titanium colour.

Easy to tune variator from Top Racing. The variator can be used with original belt. Supplied with unrestricted vario sleeve and 3 sets high quality...

Kick-starter, straight design with solid kicker head. Approx. 14cm. Please measure, as there may be clearance issues with the variator cover. Suppl...

Gearbox output shaft incl. sprocket for 50cc Chinese-built 2-stroke, CPI and Keeway scooters. 44 tooth as per original. shaft and sprocket are read...

Magneto rotor for Minarelli-based 2-stroke engines. Also suitable for, among others, Keeway, CPI Generic, Longjia, Mawi etc. There are currently 3 ...

Replacement front left and/or rear right indicator glass for various CPI, Keeway, Kymco and Rieju scooters, geared mopeds and ATVs. The turn signal...

Counterpressure spring mounting tool for convertor units up to 125mm outer diameter.

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.31). Delivered as shown with piston rings, gudgeon pin and circ...

Cylinder gasket set for all 50 and 70cc sports cylinder kits from Malossi for horizontal Minarelli AC engines.

Quick and simple replacement lever for broken or damaged clutch or brake levers. Matches original shape, colour and mount. Single brake lever suppl...

Replacement right-hand mirror in original design with E-certification for various CPI, PGO and Sachs scooters. Cheaper alternative to expensive ori...

Replacement left-hand mirror in original design with E-certification for various CPI, PGO and Sachs scooters. Cheaper alternative to expensive orig...

Replacement speedo cable in original dimensions for motorcycles. Design and dual-side mounts match the original scooter speedo cable. Length from e...

Carbon Power reeds for original reed blocks for scooters with Minarelli engines. Kinder to engines if they break-up. 2x carbon reeds supplied. Chea...

Scooter tyre innertube with 90° bent valve for easier pressure checks. Our Tip: Always replace the innertube when changing the tyre. Suitable for ...

This is a specially made Variator locking tool for blocking the variator during assembly and dismantling. Easy handling makes work fast and profess...

PRO-X is the most cost-effective shock in the YSS range. Double-action damping system with adjustable spring preload (tool included). Progressive d...

Malossi Racing clutch spring set. Springs suitable for original clutches with 3 shoes. Set comprises 3 different spring strengths: black = light (t...

Naraku Sports Contra Spring V.2 +200rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better res...

Buzzetti universal 3-point puller for alternator rotors. The 3 screws included in the delivery are simply screwed into the holes in the rotor. Then...

Structurally, the original V-belt pulley with a star-shaped carrier is an inferior component. The star shim is just too thin for the forces acting ...

This replacement pulley for standard motors corresponds in shape and dimensions to the original and provides an inexpensive alternative when pulley...

Complete starter motor incl. cables, ready to install. Number of teeth: 9 Diameter Shaft: 9mm Distance of mounting holes: 65mm

Naraku High Performance clutch bell with patented R-Vent system for more fresh air over the clutch. Prevents wear and loss of friction. Lower opera...