DD 50 2T AC 03- FT05

Arreche 23.5mm sealing ring for carbs with threaded flange.

Arreche 25mm sealing ring for carbs with threaded flange.

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

Very good quality aftermarket crank for Honda SYM AF28 and Kymco GR1 engines. The crank is a 100% match to the original and is an outstanding after...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Replacement piston kit for 50cc standard cylinder kits for horizontal air-cooled Kymco engines. You receive a piston incl. piston rings, guedgeon p...

Top Performances racing reed block with 2 reeds. As you would expect from racing technology, the petals are made from carbon. Steel petals can caus...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Licenced replica of the English Amal carburettor from Arreche. Available in various sizes. 16mm for original use and 50cc tuning, Original intake m...

Easy to tune variator from Top Racing. The variator can be used with original belt. Supplied with unrestricted vario sleeve and 3 sets high quality...

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines. White

Replacement piston kit for 50cc cylinder kits for upright air-cooled Kymco/SYM engines. You receive a piston incl. piston rings, guedgeon pins and ...

Replacement 50cc cast iron cylinder kit. Includes all parts shown, cylinder head not included as original head can be used or purchased separately.

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.73). Delivered as shown with piston rings, gudgeon pin and circ...

NARAKU sports variator for Kymco and SYM engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction o...

Many vehicles are factory-fitted with restrictors or restricted CDI units. Malossi offer this clever RPM Control Racing CDI unit. 35,000 - 50,000V ...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

Naraku small end bearing [HD-Quality] - 12x17x13. Suitable for Piaggio, Gilera, Kymco, SYM.

Replacement oil pump for all scooters with Kymco / SYM upright engines.

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single brake l...

Replacement right-hand mirror in original design with E-certification for Keeway Focus 50/ 125/ 150, Hurricane 50, ATV 50, ARN 125/ 150, F-Act 125,...

Delta Braking brake pads have a history rooted in the world of motocross and offroad. The knowledge and insight gained from this extreme environmen...

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

The name says it all: racing spark plugs are for motorsport use and their characteristics make them less suitable for road use. Where these plugs m...

High-Tech straight from the lab NGK has taken a massive step forward in spark plug technology with the new Iridium IX. Laboratory testing has shown...

OEM quality small end bearing (12x17x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Base gasket for all Kymco and SYM GR1 50cc original cylinders, as well as other scooters with 50cc GR1 engines. See application list.

High-quality, precision cylinder gasket set from Spanish gasket specialists Artein Gaskets. The materials are carefully matched to the specific dem...

Standard starter motor with 11 teeth for 50cc Piaggio, Gilera, Peugeot (upright) and PGO scooters.

High-quality, but cost-effective aftermarket piston for original cylinders from Italian piston specialists Meteor. The set contains a piston, gudge...

Malossi reinforced counter pressure torque spring - yellow = super strong

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Electric starter motor, suitable for all horizontal Kymco and SYM 50cc 2-stroke engines. OEM reference numbers: MS5017, 31210-GKAK-90C, VC27961, 15...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

Reeds for original factory reed block with carbon membranes. These cause less damaged to the engine should the reed petals break up than metal alte...

Aluminum Kickstarter [Light] in carbon look suitable for Minarelli and Peugeot engines.