DNA 50 ZAPC270

Malossi MHR carburettor kit contains Dellorto 19mm PHGB carb and all necessary mounting parts. Originally for regulated scooter trophy series with ...

Malossi 4 reed racing reed block. 0.3mm thick reeds give great power when used with the Malossi Big Valve blocks. Malossi offers 2 different thickn...

Malossi Special Belt is a high quality and low-slip belt for use on standard and tuned sports engines. Good grip means performance and minimal slip...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Malossi strengthened counterpressure springs for rear Malossi convertors, Piaggio Type. Counterpressure springs place the drive belt under tension,...

Naraku small end bearing [HD-Quality] - 12x17x13. Suitable for Piaggio, Gilera, Kymco, SYM.

Top quality cylinder kit by Naraku. An extra emphasis was put on the piston quality. The Naraku piston has a molybdenum coating, so that cylinder a...

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Piaggio AC and LC engines. Delivery as shown, including: piston rin...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 50mm for Piaggio / Gilera scooters. The kit includes a eve slider plastic plates ...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 50mm for Piaggio/Gilera scooters. The kit includes a eve slider plastic plates fo...

Counter pressure spring by Polini [Evo-Slider] with a diameter of 50mm for Piaggio / Gilera scooters. The kit includes a eve slider plastic plates ...

Quick and simple replacement lever for broken or damaged clutch or brake levers. Matches original shape, colour and mount. Single lever supplied. O...

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

These cylinder gasket sets contain all the necessary gaskets from the cylinder base upwards. They can be optionally used on Naraku 2-stroke cylinde...

The Naraku Traffic system combines contemporary fresh lines with a pleasant engine note. This system integrates very well with new modern vehicles....

Complete alternator stator for carburetted Piaggio engines from 1999 onwards. Stator supplied ready to install.

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28-30mm carb connection for MHR ...

Replacement mirror in original design with E-certification for Gilera DNA 50/ 125/ 180 scooters. Cheaper alternative to expensive original items. A...

Complete igntion lock set for Gilera DNA 50cc, 125cc and 180cc. Excellent quality and price making this a perfect choice from the usually expensive...

Delta Braking brake pads have a history rooted in the world of motocross and offroad. The knowledge and insight gained from this extreme environmen...

Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleratio...

The name says it all: racing spark plugs are for motorsport use and their characteristics make them less suitable for road use. Where these plugs m...

New Airsal Race Pro crank up there with Racing cranks from Malossi MHR-RHQ, Metrakit Pro Race or the Polini Evolution. High alloyed 18NiCrMo5 steel...

OEM quality small end bearing (12x17x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Digital micro-processor-controlled Racing ignition system from Malossi with internal rotor and dynamic ignition point adjustment. Engine revs notic...

Malossi MHR Team carburettor kit. MHR (Malossi Hyper Racing) team stands for high end racing for the Malossi Team racing scooters. The 21mm PHGB De...

Good quality crank for 50cc Piaggio AC and LC engines. Matches original 100%. Also suitable for lightly tuned to 70cc sports cylinders. Supplied wi...

Well priced 50cc replacement cylinder kit with gasket set, piston kit and all necessary parts for installation. Performance as on original item. Ta...

Malossi 45° MHR Racing performance reed block with 2 single-piece reeds. 0.3mm for improved gas flow.Straight from the Malossi MHR racing departme...

Deep groove ball bearing with dual-sided plastic seal. For instance suitable for water pump of 50cc Minarelli or 50-180cc Piaggio 2-stroke engines....

High-quality, precision complete gasket set from Spanish gasket specialists Artein Gaskets. The materials are carefully matched to the specific dem...

Rectifier / Controller changes the AC into DC. If the battery no longer charges properly, the rectifier may be the cause. This item matches the ori...

CDI ignition unit for Piaggio / Gilera with catalytic convertor. Complete replacement solves many CDI-caused issues. Suitable for vehicles with fac...

Air filter for original air box. In contrast to the original filter, this air filter is soaked in oil, which results in optimised filtering of air ...