Fiddle 1 50 2T AC 03-08 FA05U

Excellent quality cylinder head by Naraku to OEM specifications and quality. Suitable for 50cc Kymco, Sym and Honda AC cylinders.

Naraku CNC-machined racing clutch bell for Kymco, Honda and Chinese-built maxi scooters. Ensures vibration-free running and the cooling grooves hel...

Naraku quality shaft seals for various Kymco, SYM and Honda scooters. Shaft seals are required on the rear of the convertor and seal in the convert...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. M...

Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.73). Delivered as shown with piston rings, gudgeon pin and circ...

NARAKU sports variator for Kymco and SYM engines. When calibrated, this variator provides good acceleration at higher top speeds. The restriction o...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

Naraku small end bearing [HD-Quality] - 12x17x13. Suitable for Piaggio, Gilera, Kymco, SYM.

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine f...

V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

Complete Naraku torque driver. Torque drivers, counter pressure springs and clutch. No need to disassemble the original. No more over-stressing the...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

Cylinder gasket set for all 39mm Naraku cylinder sets for Kymco, SYM and Honda Dio engines with upright cylinders. Also suitable for the original c...

Cylinder head with 48mm bore for the Naraku 48mm (75cc) cylinder kit. The cylinder head reduces the compression slightly, but in doing so aids engi...

Naraku unrestricted CDI unit. Can also be used on untuned engines, and increases the rev limit from the original 8-9,00rpm. A must for tuned engine...

The NARAKU Basic 75cc cast iron cylinder kit is an affordable and robust alternative that won’t break the bank and will give you more power from ...

New version of the micro-processor-controlled ignition box kit with aluminium racing CDI unit and converter. For better spark and adjustability. A ...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...