Generic

Yasuni replacement silencers in carbon / aramid construction fits. For Yasuni R, R/07, Carrera 16, Carrera 16/07, Carrera 20 and Carrera 21 Exhaust...

With the Q-Tre, Tecnigas now offers a cost-effective scooter tuning exhaust system. This Tecnigas exhaust is suitable for 50cc engines. The silence...

With the Q-Tre, Tecnigas now offers a cost-effective scooter tuning exhaust system. This Tecnigas exhaust is suitable for 50cc engines. The silence...

The Portuguese tuning specialists, Top Racing, are a symbol of high quality scooter components. Due to Advanced production techniques, and over 50 ...

Sporty scooter tyre from Heidenau with K63 profile. The K63 tyre is characterised by its top mileage and convincing handling characteristics. Very ...

The Heidenau K66 reinforced is a long-life all-weather tyre. The profile blocks are specially cut for top handling performance. The channels guaran...

Naraku heavy-cheeked HPC racing crank increases the pre-compression in the cases for improved filling. The extra inertia improves performance and t...

Great quality Naraku crank for Euro 2 Minarelli replica Chinese-built engines. Corresponds to the original crankshaft dimensions. 16mm crank shaft ...

Thanks to its modern, open allround profile, the Heidenau K66 Snowtex winter tyre for scooters guarantees great handling on cold, wet surfaces. Tha...

Thanks to its modern, open allround profile, the Heidenau K66 Snowtex winter tyre for scooters guarantees great handling on cold, wet surfaces. Tha...

Pressure-activated petrol tap for scooters with Chinese-made, Minarelli-based engines (1E40QMB) such as CPI, Keeway etc. A petrol tap failure can o...

Shaft oil seal Internal diameter: 20mm External diameter: 30/33.5mm Thickness/Depth: 6mm

Woodruff key with blunted edges for scooters with 50-180cc Piaggio 2-stroke engines. length=12mm, wide=3mm, high=5mm

Scooter tuning has never been as easy and inexpensive as with this final complete tuning kit. Great acceleration, higher top end, without the cost ...

Very high-quality 3 in 1 tool for blocking and removing the variator and clutch bell, including integrated hex wrench to loosen the clutch retainer...

Arreche 23.5mm sealing ring for carbs with threaded flange.

Reinforced starter motor freewheel without starter sprocket, from Naraku. For original and tuned scooters with Minarelli-based, Chinese-built engin...

Naraku cylinder stud for horizontal Minarelli and Minarelli-based cylinder. Great as a replacement for broken or damaged studs. One individual stud...

Arreche 25mm sealing ring for carbs with threaded flange.

24mm intake manifold for maximum flow and performance. Ideally, you match the manifold to the size of the carb.

Naraku double-layer air filter element for original air boxes. For standard or lightly-tuned engines. Check the product image to ensure you get the...

Cost-effective replacement belt for everyday use. Good flex and outstanding grip and can easily be used in lightly tuned engines. Special belt size...

Cylinder base gasket for horizontal Minarelli and 1E40QMB engines. For air and water-cooled engines.

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Oversize fan for scooters with horizontal Minarelli engines. The style effect is almost secondary, as these fan wheels are a huge advantage to the ...

Simple, adaptable and genius intake manifold. The 2 adapter plates, 24mm and 32mm allow for different sizes of carb. The rubbers can be rotated in ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Top Performances racing reed block with 2 reeds. As you would expect from racing technology, the petals are made from carbon. Steel petals can caus...

Alternator for Minarelli-based Chinese copies, as found in many CPI, Keeway, Generic, Longjia and many other Chinese scooters. Before ordering, che...

Very often you discover you’ve ripped the seat leather on your scooter and the next time you take it out in the rain, you find yourself sinking i...

Very often you discover you’ve ripped the seat leather on your scooter and the next time you take it out in the rain, you find yourself sinking i...

Licenced replica of the English Amal carburettor from Arreche, as cheap original replacement or tuning item. Fits the original intake manifold. Com...

Licenced replica of the English Amal carburettor from Arreche. Available in various sizes. 16mm easy to tune for standard cylinders and tuned 50cc ...

Licenced replica of the English Amal carburettor from Arreche. Available in various sizes. 16mm easy to tune for standard cylinders and tuned 50cc ...

Belt pulley tappet. The accompanying kickstarter part should be replaced when the cog is changed. Suitable for CPI and Keeway models with 16mm cran...

Number plate which is positioned centrally behind the rear wheel. This was seen on standard piaggio scooters. Made of brushed stainless steel, the ...

Adjustable aftermarket clutch, same build as the Hebo. The adjustable 3-plate clutch is ideal for lightly or heavily tuned scooters. The major adva...

The starter clutch without starter sprocket. We only recommend this item without a starter sprocket if the sprocket is in 100% working order and fr...

Cylinder head nut with M7 thread for all Minarelli and Minarelli-based engines, as well as other models with M7 threads on the cylinder stud bolts.

Aluminum Kickstarter [Light] suitable for Minarelli and Peugeot engines. White

Locking spring for kick-starter carrier sprockets.

Kickstart gear for upright and horizontal Minarelli and Minarelli-based 2-stroke engines as found in CPI, Keeway, Mawi, Longija etc.

Recoil spring for kickstarter levers on CPI, Keeway, Generic and Minarelli-based Chinese-built 2-stroke engines.

Replacement reed valve gasket for horizontal 50cc 2-stroke Minarelli engines and Aprilia/Suzuki engines. Please check that a gasket is required on ...

CDI attachment rubber for ignition boxes 37x22mm on 4-stroke Chinese-built scooters.

This intermediate transmission shaft is supplied pre-pressed. Same number of teeth as the original 13/52 teeth.