GPR 50 Racing -05 (EBS050) VTHGR1A1A

6204 C3 bearing. Internal diameter 20mm, external diameter 47mm, thickness 14mm.

Low-cost intake manifold for derestricting the Derbi D50B0, EBE or EBS engines. The opening is increased to 23mm. Required where a larger carburett...

Cylinder studs incl. M7 threaded nuts for securing the cylinder. Set of 4 studs and nuts, 120mm in length, nuts are 19mm. Suitable for EBE and EBS ...

Shaft oil seal Internal diameter: 20mm External diameter: 35mm Thickness/Depth: 7mm

Shaft oil seal Internal diameter: 12mm External diameter: 20mm Thickness/Depth: 5mm

Arreche 23.5mm sealing ring for carbs with threaded flange.

Arreche 25mm sealing ring for carbs with threaded flange.

Replacement left mirror with e-mark for Cagiva Mito 50, Derbi GPR 50 R and Gilera GPR 50. This mirror can replace OEM part number 00H04602921 / 0DN...

Single replacement headlamp for GPR 50 Replica Racing geared mopeds from 2002-2003. The headlight element corresponds to the original part. Replace...

Single replacement headlamp for full beam lights on Derbi GPR 50 Replica Racing geared mopeds from 2002-2003. The headlight element corresponds to ...

Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the ex...

Replacement reed block with plastic reeds. Rather than the usual metal reeds, this item uses plastic reeds. Metal membrane petals can cause massive...

Replacement taillight glass for various Cagiva, Derbi and Ducati models. The tail light is the same in size as the original. Matches OEM-No.: 80007...

Replacement taillight for various Cagiva, Derbi and Ducati models. The tail light is the same in size as the original. Matches OEM-No.: 800077969 /...

Replacement headlamp for Derbi GPR 50R (97-00) and GPR Replica 50 (99-01) geared mopeds as well as Paddock 50 (98-99) scooters. The headlamp corres...

Ignition lock to replace more expensive original items. Combi lock with all the original functions and interchangeable. Supplied as shown. Manufact...

Low-cost intake manifold for derestricting the Derbi D50B0, EBE or EBS engines. The opening is increased to 23mm. Required where a larger carburett...

Low-cost and solid racing carburettor from Arreche with 21mm inlet. Supplied with basic tune with additional main jet. Jets may need to be changed ...

Licenced replica of the English Amal carburettor from Arreche, 19mm. Supplied with additional larger main jet. Fits the original intake manifold. C...

Licenced replica of the English Amal carburettor from Arreche, 17.5mm. Supplied with additional larger main jet. Fits the original intake manifold....

Low-cost and robust Arreche 16mm carburettor for tuning or original replacement. Basic tune with larger jet. Original airbox may be retained depend...

Licenced replica of the English Amal carburettor from Arreche. 21mm version for 70cc racing cylinders. Supplied with additional main jet. Fits the ...

Licenced replica of the English Amal carburettor from Arreche as tuning part or replacement item. Supplied with additional larger main jet. Fits th...

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...

Alternator rotor puller. Required for working on the alternator or parts under it and on crank bearings. Pressure bolt screws into the rotor and te...

Crankshaft in High Quality from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshafts. Advanced pro...

Innertube with straight valve for motorcycles with 17 inch tyres. Suitable for: 3.25-17 3.50-17 90/80-17 90/90-17 100/80x17 100/90-17 110/70-17 110...

Naraku small end bearing [HD-Quality] - 12x15x15. Suitable for Minarelli AM, Derbi EBE, EBS, D50B0, Peugeot engines.

High-quality replacement piston for 50cc original and 50cc Naraku cylinders for EBE/EBS engines. Delivery as shown, including: piston rings, gudgeo...

Top quality cylinder kit by Naraku. Extra special attention has been paid to the piston quality. The Naraku piston is molybdenum-coated, which prot...

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single brake l...

Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single brake l...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

These cylinder gasket sets contain all the necessary gaskets from the base gasket upwards, and can be optionally used on original cylinders and sta...

Airsal cylinder head 88cc [Xtreme 45mm] - EBE / EBS

Airsal piston kit 88cc [Xtreme 45mm] - EBE / EBS

Airsal cylinder gasket set 88cc [Xtreme 45mm] - EBE / EBS

Airsal 88.3cc is the largest and most powerful big bore kit available for the 50cc 2-stroke market. Top quality with Vertex pistons and serious pow...

Replacement right-hand mirror in original design with E-certification for Cagiva Witho 50, Derbi GPR 50 R and Gilera GPR 50 geared mopeds. Cheaper ...

Aluminium brake lever for faired mopeds with Minarelli AM6 engines in a lightweight, machined look. 5WX-F7211-00

Aluminium brake lever for faired mopeds with Minarelli AM6 engines in a lightweight, machined look. 5WX-F7211-00

Aluminium brake lever for faired mopeds with Minarelli AM6 engines in a lightweight, machined look. 5WX-F7211-00

Replacement speedo cable in original dimensions for Derbi GPR 50 up to 2003. Design and dual-side mounts match the original speedo cable. Length fr...

Complete igntion lock set for Derbi GPR (97-03). Excellent quality and price making this a perfect choice from the usually expensive OEM parts. Thi...

Complete igntion lock set for Aprilia RS50 (06-07) motorbikes. Excellent quality and price making this a perfect choice from the usually expensive ...