GPR 50 Racing -05 (EBS050) VTHGR1A1A

High rev bearing set from Malossi suitable up to high-end tuned Minarelli engines. Half-open polyamide cage prevents overheating. Dimensions: 20x47...

High rev bearing set from Malossi suitable up to high-end tuned Minarelli engines. Half-open polyamide cage prevents overheating. Dimensions: 20x47...

Among insiders, the Turbo Kit name is synonymous with peak performance. The Racing Turbo Kit Exhaust Carreras 50 is designed for 50cc Racing cylind...

Among insiders, the Turbo Kit name is synonymous with peak performance. The Racing Turbo Kit Exhaust Carreras 80 is designed for 80cc racing cylind...

Among insiders, the Turbo Kit name is synonymous with peak performance. The Racing Turbo Kit Exhaust Carreras 80 is designed for 80cc racing cylind...

NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All d...

NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All d...

Airsal piston ring set for 50cc sports cast iron cylinder kit for geared mopeds with EBE / EBS engines

Piston kit for 50cc sports cast iron Airsal cylinder kit for geared mopeds with EBE / EBS engines.

Airsal cast iron cylinder kits add more depth to the Airsal product range. Greater attention has been paid here to the ports, the design of which h...

Sporty scooter tyre from Heidenau with K63 profile. The K63 tyre is characterised by its top mileage and convincing handling characteristics. Very ...

6204 C3 bearing. Internal diameter 20mm, external diameter 47mm, thickness 14mm.

Low-cost intake manifold for derestricting the Derbi D50B0, EBE or EBS engines. The opening is increased to 23mm. Required where a larger carburett...

Cylinder studs incl. M7 threaded nuts for securing the cylinder. Set of 4 studs and nuts, 120mm in length, nuts are 19mm. Suitable for EBE and EBS ...

Shaft oil seal Internal diameter: 20mm External diameter: 35mm Thickness/Depth: 7mm

Shaft oil seal Internal diameter: 12mm External diameter: 20mm Thickness/Depth: 5mm

Arreche 23.5mm sealing ring for carbs with threaded flange.

Arreche 25mm sealing ring for carbs with threaded flange.

Replacement left mirror with e-mark for Cagiva Mito 50, Derbi GPR 50 R and Gilera GPR 50. This mirror can replace OEM part number 00H04602921 / 0DN...

Single replacement headlamp for GPR 50 Replica Racing geared mopeds from 2002-2003. The headlight element corresponds to the original part. Replace...

Single replacement headlamp for full beam lights on Derbi GPR 50 Replica Racing geared mopeds from 2002-2003. The headlight element corresponds to ...

Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the ex...

Replacement reed block with plastic reeds. Rather than the usual metal reeds, this item uses plastic reeds. Metal membrane petals can cause massive...

Replacement taillight glass for various Cagiva, Derbi and Ducati models. The tail light is the same in size as the original. Matches OEM-No.: 80007...

Replacement taillight for various Cagiva, Derbi and Ducati models. The tail light is the same in size as the original. Matches OEM-No.: 800077969 /...

Replacement headlamp for Derbi GPR 50R (97-00) and GPR Replica 50 (99-01) geared mopeds as well as Paddock 50 (98-99) scooters. The headlamp corres...

Ignition lock to replace more expensive original items. Combi lock with all the original functions and interchangeable. Supplied as shown. Manufact...

Low-cost intake manifold for derestricting the Derbi D50B0, EBE or EBS engines. The opening is increased to 23mm. Required where a larger carburett...

Low-cost and solid racing carburettor from Arreche with 21mm inlet. Supplied with basic tune with additional main jet. Jets may need to be changed ...

Licenced replica of the English Amal carburettor from Arreche, 19mm. Supplied with additional larger main jet. Fits the original intake manifold. C...

Licenced replica of the English Amal carburettor from Arreche, 17.5mm. Supplied with additional larger main jet. Fits the original intake manifold....

Low-cost and robust Arreche 16mm carburettor for tuning or original replacement. Basic tune with larger jet. Original airbox may be retained depend...

Licenced replica of the English Amal carburettor from Arreche. 21mm version for 70cc racing cylinders. Supplied with additional main jet. Fits the ...

Licenced replica of the English Amal carburettor from Arreche as tuning part or replacement item. Supplied with additional larger main jet. Fits th...

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...