Honda Dio G, SP-SR -94 AF18 / AF27

Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 95x20mm. For rear brake use, ...

Top Racing offers you a cheap but very good clutch spring kit in three different weights. for original 3 shoe clutch and 107mm Top - Racing clutche...

Top quality ARTEK racing wrist pin needle bearing.

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Aluminium height adjuster set for rear shocks, from Naraku Performance. This height adjuster set gives scooters a more dynamic look by raising the ...

Tuned engines generally develop their power higher in the rev range and the engine can lose performance at lower revs, meaning poor drive. To comba...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

Malossi Torque spring. Blue - +106%

Malossi Torque spring. Green - +60%

Carbon reeds as a replacement to steel alternative for improved responsiveness. Kinder to the engine if they break up. An absolute must. 1x reed su...

Reinforced small end bearing by Top Racing. Especially the fragile bearing cage is more stable. Can be used in high-speed, high-end racing engines....

Having a large intake manifold makes little difference without the correct reed block. This low-cost racing reed block makes for a clear path and g...

Replacement reed block with Metal reed petals. Suitable for all scooters with upright Kymco, Sym or Peugeot engines.

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Naraku unrestricted CDI unit. Can also be used on untuned engines, and increases the rev limit from the original 8-9,00rpm. A must for tuned engine...

This kickstarter will get you firing again. Matches the design and size of the original item and is suitable for anyone looking for a simple kickst...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

Low-cost replacement for defective kick-starter shaft. Matches size and dimensions of the original.

Replacement mirror in original design for Honda PK 50 Wallaroo, SP 50 Dio and NE 50 Vision scooters. Cheaper alternative to expensive original item...

OEM quality small end bearing (12x17x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Malossi strengthened counterpressure springs for rear Malossi convertors, Peugeot Type. Counterpressure springs place the drive belt under tension,...

Indicator relay 12V in original Chinese-built manufacturer quality. The plug fits 100% to the original connector on Kymco, SYM, Keeway, CPI and Gen...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...