Honda Dio G, SP-SR -94 AF18 / AF27

Reinforced small end bearing by Top Racing. Especially the fragile bearing cage is more stable. Can be used in high-speed, high-end racing engines....

Having a large intake manifold makes little difference without the correct reed block. This low-cost racing reed block makes for a clear path and g...

Replacement reed block with Metal reed petals. Suitable for all scooters with upright Kymco, Sym or Peugeot engines.

Set of 3 Naraku clutch springs for original clutches. 3 different strengths. Engagement point RPM alters in accordance with the value on the spring...

Naraku unrestricted CDI unit. Can also be used on untuned engines, and increases the rev limit from the original 8-9,00rpm. A must for tuned engine...

This kickstarter will get you firing again. Matches the design and size of the original item and is suitable for anyone looking for a simple kickst...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

Brake pads with organic composition. This coating mixture is generally used by the original scooter manufacturers as the OEM part. Solid brake perf...

Low-cost replacement for defective kick-starter shaft. Matches size and dimensions of the original.

Replacement mirror in original design for Honda PK 50 Wallaroo, SP 50 Dio and NE 50 Vision scooters. Cheaper alternative to expensive original item...

OEM quality small end bearing (12x17x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.

Malossi strengthened counterpressure springs for rear Malossi convertors, Peugeot Type. Counterpressure springs place the drive belt under tension,...

Indicator relay 12V in original Chinese-built manufacturer quality. The plug fits 100% to the original connector on Kymco, SYM, Keeway, CPI and Gen...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

The counterpressure spring presses the drive belt onto the rear pulley. When power is increased, the counterpressure spring must be changed for a s...

Naraku quality shaft seals for various Kymco, SYM and Honda scooters. Shaft seals are required on the rear of the convertor and seal in the convert...

This piston ring set can be optionally used in Naraku 2-stroke cylinders, but is also suitable for original cylinders and standard cast iron cylind...

High-quality, precision cylinder gasket set from Spanish gasket specialists Artein Gaskets. The materials are carefully matched to the specific dem...

Malossi reinforced counter pressure torque spring - yellow = super strong

Naraku Sports Contra Spring V.2 +2000RPM The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Piston rings suitable for the Airsal 70cc sport cylinder kit for Kymco, SYM upright engines.

Reinforced Malossi MHR torque spring for Kymco, Honda, GY6 engines. Perfect for tuned engines and standard engines suffering from slipping belts.

Naraku puller for alternator magnet wheels. Screws onto the existing rotor thread and is tensioned with the tensioning bolt. Light taps with a hamm...

12V replacement indicator relay as originally fitted in many scooter types. 90° offset 2-pin connection. Please check product image. Suitable for ...

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Back plate in plastic for counter pressure spring. Results in clean shifting and low loss of power. For tuned and original scooters.

Piston ring set Airsal 50cc [Sport] - Kymco/Sym upright