Italjet

High rev bearing set from Malossi suitable up to high-end tuned Minarelli engines. Half-open polyamide cage prevents overheating. Dimensions: 20x47...

High rev bearing set from Malossi suitable up to high-end tuned Piaggio engines. Half-open polyamide cage prevents overheating. Dimensions: 20x52x1...

High rev bearing set from Malossi suitable up to high-end tuned Minarelli engines. Half-open polyamide cage prevents overheating. Dimensions: 20x47...

Malossi all-in-one 25mm MHR carburettor set with suitable filter pre-configured for MHR cylinders. 25mm is the optimal variant for high end cylinde...

Malossi MHR Replica 50cc racing cylinder, the little brother of the 80cc MHR. Strongest in the 50cc category with 6 overflow channels and 3 outlet ...

Malossi ignition system with coil and control unit for scooters with Piaggio engines without immobiliser. Simply swap out with the original and ach...

Replacement bolts for the internal rotor ignition systems from Malossi for scooters with Piaggio AC or Minarelli engines.

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Malossi MHR intake manifold with short opening and straight connection. 21/24.5mm variant has a 21mm opening and the 24.5mm carb connection for MHR...

Malossi MHR intake manifold with short opening and straight connection. 22/28mm variant has a 22mm opening and the 28mm carb connection for PHBG 15...

Replacement electronic control unit for the Malossi inner rotor ignition unit for scooters with Minarelli or Piaggio 2-stroke engines, as well as g...

High rev bearing sets from Malossi up to high-end tuned Piaggio engines. Outer ring reduced to 10.8mm for better lubrication. Ball bearings with 8x...

Malossi intake manifold with short opening and angled connection. 22/28mm variant has a 22mm opening and the 28mm connection has the width of the o...

Malossi MHR intake manifold with short opening and straight connection. 26/30mm variant has a 26mm opening and the 30mm carb connection for MHR Tea...

Malossi intake manifold with short opening and angled connection. 20.5/23mm variant has a 20mm opening and the 23mm connection has the width of the...

High Tech convertor plate in extremely resistant nitride steel from Malossi. Features straight guide grooves for better acceleration. Guide grooves...

Innovative intake manifold in extreme heat and fuel-resistant Viton from the Malossi Racing MHR series. Rubber can be rotated in the aluminium base...

Malossi racing clutch spring set for original clutches in 3 spring weights. black = light (touring) White = medium (sport) Yellow = hard (racing) h...

The finest clutch bell you could use, with cooling vents for improved heat dispersion and reduced slip on the bell and plates.

Malossi racing carbon reeds for optimized flow and fuel-air mixture. Recommended in conjunction with a larger carburettor. An absolute must for sco...

Malossi racing carburettor set for 125-180cc Piaggio 2-stroke scooter engines. Set contains: 25mm Dellorto carb with manual choke and racing air fi...

Malossi pre-hardened carbon fibre clutch springs for the Malossi Delta Clutch for scooters with 125-180cc Piaggio 2-stroke engines.

Piston ring set for the 172cc Malossi cylinder kit for scooters with Piaggio 125-180cc 2-stroke engines.

Piston kit for 172cc Mlaossi cylinder kit for scooters with Piaggio 125-180cc 2-stroke engines.

Cylinder gasket set for 172cc Malossi cylinder kit for scooters with Piaggio 125-180cc 2-stroke engines.

MHR TEAM VL16 reed block straight from the race track. Optimized for the big bore cylinder kits with 28mm carbs. 42% larger valve with 0.3mm reeds....

Very high quality Malossi crank for 12mm gudgeon pins. Typical Malossi high quality. Full cheek design for higher pre-compression, for max fill and...

Sports variator from Malossi for better acceleration and top speed. Variator weights (20x17, 9g and 12.5g) and altered counterpressure spring inclu...

Malossi racing exhaust system for 172cc Aluminium cylinder for scooters with 125-180cc 2-stroke engines. Great design with blue-grey anodized silen...

Currently the best the market has to offer in high-end clutches. Top quality with endless set up possibilities. Adjustable pre-tension with various...

Very well-engineered and robust sports clutch from Malossi. Suitable for 125-180cc Piaggio 2-stroke engines. Reinforced clutch springs and weight-s...

Malossi Racing clutch spring set. Springs suitable for original 3 plate clutch for 125-180cc Piaggio 2-stroke engines. Set comprises 3 different st...

Malossi aluminium cylinder with 172cc for 125 and 180cc scooters with Piaggio 2-stroke engines. Great torque and performance even on 180cc cylinder...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Reinforced sports counterpressure springs from Malossi for 125-180cc Piaggio 2-stroke engines. Increased rev range and acceleration. For use with o...