Jonway

A low-cost and good quality, standard replacement belt from NARAKU. The grip provides good acceleration, low loss of traction and optimal power tra...

Good quality replacement variator without performance enhancement from NARAKU. Set of weights (16x13 5.5 g) is supplied. Can be used with restricte...

2008 ZZIP maintenance manual for 4-strokes that follows a similar layout to the 2-stroke alternative. From Stefan Zipperer Kymco 50 / 125cc 4-strok...

MTKT rear bodywork. The cover wraps around the protruding tank cover and creates a line with the seat. Together with the seat tray, this is a must-...

MTKT rear bodywork. The cover wraps around the protruding tank cover and creates a line with the seat. Together with the seat tray, this is a must-...

Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Spe...

Naraku Sports Contra Spring V.2 2 Pack, +1000, +1500 rpm The current version of the Naraku counter pressure spring uses a modified alloy spring pro...

Complete Naraku torque driver. Torque drivers, counter pressure springs and clutch. No need to disassemble the original. No more over-stressing the...

Crankcase breather system by Naraku. A Simple, yet effective design by Naraku suitable for all 139QMB/QMA (GY6 50) Kymco and GY6 125- 180cc 4- stro...

Naraku Racing Variator for all GY6 engines with 125cc or above. Set comprises: variator, variator pressure plate, 10.3g sliders, CNC-machined outer...

Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to t...

This bearing set contains all the relevant bearings found within the engine. A complete kit, at a low price. Crank main bearings not included. Not ...

The most low-cost aftermarket clutch we offer. Even tuned engines can have issues with the clutch. Glazed plates, bad starting or vibrations are in...

Replacement clutch bell for 107mm clutches on 50cc Piaggio, Peugeot, Kymco, Sym along with all4 stroke scooters with the 139QMB engines. Very well ...

Complete, pre-assembled clutch unit consisting of a rear converter torque driver, torque spring, clutch housing and clutch shoes. A defective clutc...

Variator replacement in OEM-quality consisting variator unit with back plate, weights and sliders. Made in China.

Low-cost aftermarket kickstarter shaft [semi-circle], for Kymco 2- and 4-stroke 50/125cc engines. There are different shaft lengths for different c...

Standard camshaft for 50cc 139 QMB/QMA engines as originally factory- fitted.

The starter clutch creates the link between the starter and the crankshaft. The clutch secures the components if the motor is turned on and the eng...

Magneto rotor for alternator Version 1. There are currently 2 different versions of the alternator. Version 1 has a white main connector and 2 cabl...

Complete cylinder head for 50cc 139QMB / QMA engines. Unlike many other available cylinder heads, this is a complete head. That means: valves, valv...

Indicator relay 12V in original Chinese-built manufacturer quality. The plug fits 100% to the original connector on Kymco, SYM, Keeway, CPI and Gen...

Floating axle for engine mounts. Only the bolt and nut, engine mount not included.

Engine mount for 139QMB/QMA engines. This version has a round thrust bearing (tube). Check item against image. Bolt and nut not included!

Replacement rear shock with black spring and with a length: 330mm (eyelet to eyelet).

Centre stand spring (galvanized steel). Length: 85mm Width: 15mm Wire Size: 3mm

Side stand spring (galvanized steel) Length: 90mm Width: 15mm Wire Size: 2,5mm

Side stand for scooters such as REX RS 450 or Baotian BT49QT-9. Please check the product image.

Centre stand for Rex RS 450 und Baotian BT49QT-9, Benzhou City Star and similar designs. The distance between the floor and center fixing eye is 20...

Wheel-mounted speedo drive for speedo cables with retainer nut and square drive. Axle diameter 10mm. As there are various types of drive fitted to ...

Aluminium rear wheel for drum brake models. Suitable for all scooters with 2.15x10 wheels. The model pictured is fitted to Chinese-built scooters f...

Front alloy wheel for disc brake models. Suitable for all scooter models with 2.15x10 wheels. The model pictured is a factory-fitted item on Chines...

Standard brake line for front disc brakes which are factory fitted. Suitable for all vehicles with front brake discs. Length: 92cm, meaning it can ...

This brake system consists of a hand brake cylinder (hand brake pump) with lever, hose, calliper with pads and brake light switch. The brake system...

Rear left orange indicator lens. Suitable for all scooters with the body design like the Rex RS450, Baotian BT50QT-9, etc. To be sure, please check...

Orange indicator lens, rear right. Suitable for all vehicles with bodywork design like the Rex RS450, Baotian BT50QT-9, etc. To be sure, please che...