Keeway

Arreche 25mm sealing ring for carbs with threaded flange.

Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the ex...

Replacement reed block with plastk reeds. Rather than the usual metal reeds, this item uses plastic reeds. Metal membrane petals can cause massive ...

Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the ex...

Small but great-looking coloured oil filler bolts in blue, red, orange or gold. 1x bolt of the required size supplied with relevant O-ring.

Long-life steel chain sprocket. 51T / 420. Original item on the following geared mopeds: APRILIA MX 50 SM Super Motard, 2002-2003 GENERIC Trigger 5...

Long-life steel chain sprocket. 50T / 420. Original item on the following geared mopeds: APRILIA MX 50 SM Super Motard, 2002-2003 GENERIC Trigger 5...

17-inch scooter tire with road surface in the dimension 100/80-17 57N.

Low-cost and solid racing carburettor from Arreche with 21mm inlet. Supplied with basic tune with additional main jet. Jets may need to be changed ...

Licenced replica of the English Amal carburettor from Arreche, 19mm. Supplied with additional larger main jet. Fits the original intake manifold. C...

Licenced replica of the English Amal carburettor from Arreche, 17.5mm. Supplied with additional larger main jet. Fits the original intake manifold....

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Low-cost and robust Arreche 16mm carburettor for tuning or original replacement. Basic tune with larger jet. Original airbox may be retained depend...

Carbone Lorraine V-Brakes sintered pads for scooters, motorcycles, mopeds and quads. Outstanding braking performance even in the wet, less slip and...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Low-cost sprockets in various tooth sizes. Chose a taller gear for higher top end, or a shorter gear for improved acceleration. Ratio of 1:2 will a...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Small but great-looking coloured oil filler bolts in blue, red, orange or gold. 1x gold bolt of the required size supplied with relevant O-ring.

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

Carburetor with clamp fixation (direct mount) are used where the carburetor is directly mounted on a stiff intake manifold. This is necessary on st...

High-quality replacement piston for 50cc original (cast iron, 40.25mm) and 50cc Naraku cylinder kits for Minarelli AM, Generic, KSR-Moto, Keeway, M...

Well priced replacement crank in OEM-quality for original and lightly tuned 50cc mopeds with Minarelli AM, Generic, KSR-Moto, Keeway, Motobi, Ride,...

Alternator rotor puller for Aprilia models with Aprilia engines, Suzuki, geared mopeds and horizontal cylinder Minarelli engines. alternative to st...

M10x1.25 nut for the rotor on the alternator. Suitable for Minarelli AM, Generic, KSR-Moto, Keeway, Motobi, Ride, CPI, 1E40MA, 1E40MB engines and o...

Replacement headlamp for CPI Supermoto 50/ 125, Supermoto SMX 50 and Supercross 50 geared mopeds. Matches the original item.

Innertube with straight valve for motorcycles with 17 inch tyres. Suitable for: 4.00-17 4.50-17 120/80-17 120/90-17 130/70-17 130/80-17 130/90-17 1...

High Quality Racing full circle crankshaft from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshaf...

Crankshaft in High Quality from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshafts. Advanced pro...

Innertube with straight valve for motorcycles with 17 inch tyres. Suitable for: 3.25-17 3.50-17 90/80-17 90/90-17 100/80x17 100/90-17 110/70-17 110...