Kreidler

Set of 3 sliders for Malossi Multivar variators. Sliders should be replaced to avoid damage. Not suitable for Piaggio MHR variators.

Digital micro-processor-controlled Racing ignition system from Malossi with internal rotor and dynamic ignition point adjustment. Engine revs notic...

Road legal update for the MHR Malossi cylinder. MHR Replica is a 70cc aluminium cylinder with hard chromed cylinder liner. One of the strongest per...

Malossi robust, high compression MHR Racing crank with 39.2mm standard stroke and 80mm standard rod length, designed for 10mm gudgeon pins. Safe up...

High compression MHR racing crank from Malossi with 85mm length rod with 12mm gudgeon pins especially for 50cc MHR Team cylinders with modular head...

The popular MTKT seat trays are now available in a vented design. An aggressive look and sporty style give your scooter a new look that still leave...

The popular MTKT seat trays are now available in a vented design. An aggressive look and sporty style give your scooter a new look that still leave...

Naraku Sports Contra Spring V.2 +1500rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Naraku Sports Contra Spring V.2 +1000rpm The current version of the Naraku counter pressure spring uses a modified alloy spring providing better re...

Standard original exhaust for GY6 125/150cc engines. There are various exhaust systems for these engines. The main difference is in the mounting of...

SLS hose clamp - 139QMB/QMA

Oil plug gasket for 139QMB/QMA.

SLS [secondary air system] gasket - 139QMB/A

Oil strainer bolt O-ring - 139QMB/QMA

Timing chain tensioner gasket for 139QMB/QMA.

Cylinder head gasket [50cc = 39mm] - GY6 50cc

This gasket sits in the valve cover in an identical metal plate and seals the crankcase breather. For valve covers with and without SLS.

Right-hand crankcase gasket - GY6 50cc

Mid-crankcase gasket. This gasket seals the left and right hand sides together. Required when changing the crank or completely splitting the cases.

Gasket for the gearbox cover on GY6 50cc 4-stroke engines.

Naraku Racing variator for all 50cc 2-stroke Minarelli engines with upright and horizontal cylinders. The surfaces offer optimal ratio change. This...

The Tecnigas Next-R suitable for GY6 50cc 4-stroke and 4-stroke engines Kymco. This exhaust has a good energy yield with relatively low sound. In t...

Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mount...

Complete replacement engine for 125cc GY6 4-stroke 152QMI engines with a long block and rear disc brake. Long block models take an 743mm v-belt. Th...

Complete replacement engine for 125cc GY6 4-stroke 152QMI engines with a long block and rear disc brake. Long block models take an 835mm v-belt. Th...

Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 22 tooth version. This gear has 47 teeth.

SLS with hose for GY6 50cc exhaust systems with SLS. Often this part is necessary if the mounting bolts have rusted or locked, or the engine is run...

M10x1.25mm nut for front belt pulleys. For Minarelli engines or other models with the same dimensions. (Thread on the variator side of the crank).

Valve cover for GY6 125/150cc 4-stroke 152/157QMI engines WITH SLS system. The valve cover is ready to install and delivered as shown. Valve cover ...

Complete valve cover with connector for 50cc GY6 and Kymco 4-stroke engines. The valve cover is ready to install and supplied as shown. The valve c...

Complete cylinder head with pre-installed valves for all GY6 125cc 152QMI engines. Ready to install with SLS connector. Ready to install. Please no...

139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted...

Replacement drive belt suitable for GY6 125/150cc engines with long blocks. Dimensions: 835-20-30

Replacement drive belt suitable for scooter with 12 or 13” wheels. Mostly used on 12” wheel vehicles with rear brake disc. On 13” models it i...

Standard brake shoes. Also included: 2 new springs. Performance and construction as per original item. Dimensions: 110mmx25mm For rear drum brakes ...

Rubber stops for the engine rockers. 2 items generally required when changing out.